My Winter Project (E55bullet) *Pics*
#28
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
Status update.....
We currently are at a standstill I have to work and my mechanic has been sick. we still have to...
Change the rear breaks
Mount the wheels
Cut holes and run lines
Mount the front mez pump (and find out if it runs all the time)
Mount rear pump in tank
Bleed the cooling system
Mount the air bid and painted parts
Limp car home
Detail car
Send Jerry ECU for a box tune until Tfest
And miss out on spring drag racing (unless Jerry is confident it won't blow up on a box tune)
Go to timmay fest and run 14s bc it will be hotter than crap
Wait for fall to run 9s
Oh and through in an x pipe somewhere along the line
And have miscellaneous dents pulled (he was supposed to come look t it today)
We currently are at a standstill I have to work and my mechanic has been sick. we still have to...
Change the rear breaks
Mount the wheels
Cut holes and run lines
Mount the front mez pump (and find out if it runs all the time)
Mount rear pump in tank
Bleed the cooling system
Mount the air bid and painted parts
Limp car home
Detail car
Send Jerry ECU for a box tune until Tfest
And miss out on spring drag racing (unless Jerry is confident it won't blow up on a box tune)
Go to timmay fest and run 14s bc it will be hotter than crap
Wait for fall to run 9s
Oh and through in an x pipe somewhere along the line
And have miscellaneous dents pulled (he was supposed to come look t it today)
Last edited by E55Bullet; 02-16-2012 at 11:02 PM.
#31
Member
Join Date: Jan 2008
Location: West Chester, OH
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
2005 C230WZ, 2004 E55, 2004 Audi S4
#34
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
update*
ok, got the breaks done (EBC yellow stuff) wheels mounted Tb installed, having trouble with the Y pipe, but will be on tomorrow. Trunk tank is mounted with the rule 2000 pump inside and we have ran the hoses to the front of the car.. Thats about it, here are some pics!
Last edited by E55Bullet; 02-21-2012 at 03:57 AM.
#36
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
*wheels*
alright guys, wheels are badass. I lowered the car all the way down with the ELM for giggles.it rubs so I wont be able to drive like this, but it looks sweet for the pics!
#38
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
update
worked on the car tonight...got the hoses ran, front pump mounted, and put the front bumper back on with the color matched grill...
things to be done
wire both pumps
fill with antifreeze
bleed system
send ecu off
remove dents
detail
things to be done
wire both pumps
fill with antifreeze
bleed system
send ecu off
remove dents
detail
#40
Senior Member
looking good, how did you find running the duroflex? did you go up and over the wheel well?
#47
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
I see what ou are saying. It's not perfect, but it's damn close. The insure lighting kills it. Wait til I get it outside... Plus the car has about an inch of dust on it...
#50
MBWorld Fanatic!
Thread Starter
Join Date: Apr 2009
Location: Lafayette, IN
Posts: 1,582
Likes: 0
Received 1 Like
on
1 Post
2008 ML63 2009 SL63 2010 Alpha 7 GTR
Running the hose was a nightmare. It's too big and thick (insert joke here) to do anything with. Plus it's easy to kink. I went right above the wheel well into the fender and down. You can get it to work but it's not a walk in the park.