Those of you with Aftermarket wheels - what size lug nuts did you use?
07-10-2012, 01:05 AM
#1
Junior Member
Thread Starter
Join Date: Feb 2007
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Those of you with Aftermarket wheels - what size lug nuts did you use?
Just had a set of wheels remade, and I'll be putting them on myself after the tires are mounted. I was wondering if anyone could tell me the proper size/length lug nuts to purchase for the aftermarket wheels? I wanted to install lug nut locks at the same time. If it matters at all, the wheels are Avus AF-502's. Thanks in advance guys!
07-10-2012, 01:30 AM
#2
Junior Member
Join Date: Apr 2012
Location: Vancouver, BC
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Obsidian Black E55
According to forgestar.
For their wheels they recommend a 17mm Cone seat 28-30mm shank.
As far as im concerned for any wheel 28-30mm shank should provide enough turns to properly secure the wheel to the hub.
From there on size accordingly if you plan on running an X size spacer. Factory wheels use ball seat, forgestar use cone seat.
Hope that helps.
For their wheels they recommend a 17mm Cone seat 28-30mm shank.
As far as im concerned for any wheel 28-30mm shank should provide enough turns to properly secure the wheel to the hub.
From there on size accordingly if you plan on running an X size spacer. Factory wheels use ball seat, forgestar use cone seat.
Hope that helps.
