Heading to Silver Dollar drags this weekend
#1
MBWorld Fanatic!
Thread Starter
Heading to Silver Dollar drags this weekend
Silver dollar is having their annual Spring MCE track day, so I am heading out there. Weather looks like 30% isolated thunder showers, so hopefully it will miss us.
Interested to see if the new mods spice things up a bit
28" Slicks
3000 stall
Adjustable Camber arms
SRT8 3.06 gears
15lb race battery
E63 front end conv
Interested to see if the new mods spice things up a bit
28" Slicks
3000 stall
Adjustable Camber arms
SRT8 3.06 gears
15lb race battery
E63 front end conv
#3
PLATINUM SPONSOR
Digin those big hoosiers! Looks like cooler weather for ya ?
__________________
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
E63 Biturbo, UPD Cold Air induction kit, UPD performance crank pulley and UPD adjustable rear suspension with ride height adjustment.
CL55 UPD Cold Air Boost kit, UPD 3000 stall converter, UPD 77mm SC clutched pulley and beltwrap kit, Custom long tubes, UPD crank pulley , UPD suspension kit, UPD SC pulley, Aux. HE, Trunk tank w/rule 2000 pump, Mezeire pump, UPD 5pc idler set, Aluminum rotor hats.
www.ultimatepd.com
instagram @ultimate_pd
facebook.com/ultimatepd
#5
MBWorld Fanatic!
Thread Starter
You refering to dyno numbers?
Yes, nothing has changed since last time where I put down 532rwhp/704rwtq on BIP's Dynamics Dyno, and 611rwhp/708rwtq on a local dynojet.
Thanks Elliot, remember this time last year you were at this event where you ran a PB
Will be bringing the regular 255 Hoosier radials too, and see if I can hit 130mph traps. I will be working on getting my 60's down into the 1.5x or hopefully 1.4x range with the 28" slicks. Alot to adjust too with the camber arms, so this will be more of a tweaking test and tune, not expecting anything outrageous time wise.
Yes, nothing has changed since last time where I put down 532rwhp/704rwtq on BIP's Dynamics Dyno, and 611rwhp/708rwtq on a local dynojet.
Thanks Elliot, remember this time last year you were at this event where you ran a PB
Will be bringing the regular 255 Hoosier radials too, and see if I can hit 130mph traps. I will be working on getting my 60's down into the 1.5x or hopefully 1.4x range with the 28" slicks. Alot to adjust too with the camber arms, so this will be more of a tweaking test and tune, not expecting anything outrageous time wise.
Last edited by chawkins2001; 04-24-2013 at 12:05 PM.
#7
MBWorld Fanatic!
You refering to dyno numbers?
Yes, nothing has changed since last time where I put down 532rwhp/704rwtq on BIP's Dynamics Dyno, and 611rwhp/708rwtq on a local dynojet.
Thanks Elliot, remember this time last year you were at this event where you ran a PB
Will be bringing the regular 255 Hoosier radials too, and see if I can hit 130mph traps. I will be working on getting my 60's down into the 1.5x or hopefully 1.4x range with the 28" slicks. Alot to adjust too with the camber arms, so this will be more of a tweaking test and tune, not expecting anything outrageous time wise.
Yes, nothing has changed since last time where I put down 532rwhp/704rwtq on BIP's Dynamics Dyno, and 611rwhp/708rwtq on a local dynojet.
Thanks Elliot, remember this time last year you were at this event where you ran a PB
Will be bringing the regular 255 Hoosier radials too, and see if I can hit 130mph traps. I will be working on getting my 60's down into the 1.5x or hopefully 1.4x range with the 28" slicks. Alot to adjust too with the camber arms, so this will be more of a tweaking test and tune, not expecting anything outrageous time wise.
Got a PB at the time and a broke tranny. And had a sh*t load of fun with you and Jason. Looking forward to doing it again on the next one.
Trending Topics
#17
MBWorld Fanatic!
Thread Starter
Bart, sorry that happened brotha. Hopefully it is not as bad as it looks.
Onething I would like to say is the 3000 stall is UNBELIEVABLE. It drives like stock but once it stalls, all hell breaks lose. You can also load it up close to 3000rpms from s stop without the car moving an inch.
The 3.06 srt8 Chrysler gear has also changed the car completely. It obviously revs through the rpm range much quicker, shifts seem faster and the tcu fix by jerry is working flawlessly. Sled feels much lighter on its feet, but tomorrow while be the true test.
Gears snd stall make this thing kick like a mule with blue ballzzzz.
Onething I would like to say is the 3000 stall is UNBELIEVABLE. It drives like stock but once it stalls, all hell breaks lose. You can also load it up close to 3000rpms from s stop without the car moving an inch.
The 3.06 srt8 Chrysler gear has also changed the car completely. It obviously revs through the rpm range much quicker, shifts seem faster and the tcu fix by jerry is working flawlessly. Sled feels much lighter on its feet, but tomorrow while be the true test.
Gears snd stall make this thing kick like a mule with blue ballzzzz.
Last edited by chawkins2001; 04-26-2013 at 09:51 PM.
#18
MBWorld Fanatic!
GL tomorrow Craig, keep us all posted and be safe.