approx cost of having calipers powder coated?
#1
Member
Thread Starter
Join Date: May 2008
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#81 MX5 Cup, M52 E30 325i, 2500HD Duramax 500rwhp
approx cost of having calipers powder coated?
I have received a few quotes and they are very far apart. What are you guys paying yo have your calipers color changed? Thanks.
#3
Senior Member
spray paint is cheap but can be a little messy and should tape off the bleeders/ hardware/ rotor ect. powder coat would be a really nice finish but need to drain and may need disassemble the pistons and rubber stuff. not totally sure.
Either way can look really nice imo!!
Either way can look really nice imo!!
#4
Senior Member
$1000 Painted and Installed is roughly what I paid. I had it professionally done, however I would not recommend the vendor because of shipping issues and delays. Thats me dropping off the car and the shop taking off wheels and calipers, then sending out calipers to be fully disassembled and shop putting everything back together. The price was fair for me.
Last edited by W109 W211 6.2L; 06-18-2013 at 11:59 AM.
#6
Do you have money to burn? If so, send it to me.
#7
Senior Member
My powder coated wheels were $500 for 4.
Last edited by W109 W211 6.2L; 06-18-2013 at 12:05 PM.
The following users liked this post:
TexasBenzBandit (05-02-2020)
Trending Topics
#8
What are you talking about? There are a handful of shops around here that'll do it for a fraction of the price and they work cars far more valuable than mine or yours.
Anybody paying $1,000 for a set of calipers powdercoated is either a) rich and doesn't care, or b) clueless.
Anybody paying $1,000 for a set of calipers powdercoated is either a) rich and doesn't care, or b) clueless.
#10
$1000 Painted and Installed is roughly what I paid. I had it professionally done, however I would not recommend the vendor because of shipping issues and delays. Thats me dropping off the car and the shop taking off wheels and calipers, then sending out calipers to be fully disassembled and shop putting everything back together. The price was fair for me.
Dude, you got RIPPED, worse than a $tealer would've done.
#11
Senior Member
What are you talking about? There are a handful of shops around here that'll do it for a fraction of the price and they work cars far more valuable than mine or yours.
Anybody paying $1,000 for a set of calipers powdercoated is either a) rich and doesn't care, or b) clueless.
Anybody paying $1,000 for a set of calipers powdercoated is either a) rich and doesn't care, or b) clueless.
I am definitely clueless, that's how I have gotten to where I am in life. The final bill was near $800, ill be damned if I round up on this forum again. HAHA
#12
Former Vendor of MBWorld
#13
Senior Member
I dig the orange, (Going after the Ceramic color?)So I am getting heckled over $200 and I live in downtown Chicago. HAHAHA classic, this forum never ceases to amaze me.
#14
You said a grand not $800, and pasc6201 got his for $600 with the rebuild kits ... $400 difference isn't little, that's another set of powdercoated rims you could've had.
Last edited by ArmoE55; 06-18-2013 at 12:24 PM.
#15
Member
Thread Starter
Join Date: May 2008
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#81 MX5 Cup, M52 E30 325i, 2500HD Duramax 500rwhp
You guys wouldnt believe, but I did receive a quote for $2000 including r/r, caliper rebuild kits. I believe they quoted so high because they arent interested in doing the work.
#16
Senior Member
I said "roughly $1000" to be exact. I dont know why I post on this forum. Mine were professionally done and ripped apart with all new gaskets. Price was fair for me and I got a new $4k part out of it so do as you please. Done with this post.
#17
That's just ridiculous. And you're right, they likely don't want anything to do with it, hence the jacked up price.
#18
MBWorld Fanatic!
#21
Member
Thread Starter
Join Date: May 2008
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
#81 MX5 Cup, M52 E30 325i, 2500HD Duramax 500rwhp
^ no offense but it definitely seems like you could have spent a little more time taping off the critical components. I'm looking for a job in between above, and the 1000 dollar job.
#22
Junior Member
Join Date: Aug 2011
Location: Grand Rapids, MI
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
05 E55
#23
MBWorld Fanatic!
They look like day one.. plus with akebono pads always shiny, the dust washes right off if there is any. I used some high performance high heat clear so as you can see the quality on both the yellow and green calipers that I did...
#25
MBWorld Fanatic!
Join Date: Oct 2009
Location: bay area, california
Posts: 2,510
Likes: 0
Received 1 Like
on
1 Post
Aston Martin V8 Vantage
if you choose not to be "done" with this post, do you mind posting some unedited pics of your car in the current condition? interested to see how it looks with powdercoated black factory wheels and red calipers. thanks. this is still a forum, and you chose to be on it