torque specs on arnott
#1
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 201 Likes
on
154 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
torque specs on arnott
does anyone have the torque specs on the suspension bolts that hold in the airmatic strut assembly as my front passenger side just sprung a leak so i ordered arnott replacement and will be installing it myself next week but i cant find the torque specs
Last edited by gaspam; 10-04-2013 at 04:01 PM.
#3
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 201 Likes
on
154 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
lol yeah i usually just go with "tight" but since they are moving supension parts i figured i bust out my torque wrench and do it to spec so it doesnt come undone at 100+ mph :P
The following users liked this post:
Overheated (08-05-2023)
#4
MBWorld Fanatic!
Join Date: Jul 2012
Location: Canada
Posts: 1,556
Likes: 0
Received 13 Likes
on
12 Posts
07 E63 + 07 CLK63CAB
LOl if it comes loose then obviously you did not have it tight even at 120+ mph. If you go the torque wrench method just remember the torgue spec is usually done with a fresh, clean thread on the bolt and the nut threads should be chased with the proper size tap with the appropriate lubricant applied before tightening. When was the last time your torque wrench was calibrated?
#5
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 201 Likes
on
154 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
over torquing can cause a fasterner to come loose/fail just the same as under torquing
anybody have the real specs? i can figure out the "putting it on tight" method myself
anybody have the real specs? i can figure out the "putting it on tight" method myself
Trending Topics
#9
MBWorld Fanatic!
Here are torque specs:
3 nuts up top - 30Nm
Airline - 2Nm (I just hand tightened)
1 nut/bolt down below 165Nm
I think that's it
3 nuts up top - 30Nm
Airline - 2Nm (I just hand tightened)
1 nut/bolt down below 165Nm
I think that's it
#11
MBWorld Fanatic!
#12
MBWorld Fanatic!
Thread Starter
Join Date: Feb 2011
Location: miami / delray beach
Posts: 2,841
Received 201 Likes
on
154 Posts
2014 E63s amg 4matic, 2009 C63, 2006 E55 AMG , 2001.5 AUDI S4 stg 3+ w/meth
yep this is the 4th airmatic to go out on me (1 at a time lol) so at least now i will have replaced all of them and all the replacements are warrantied...
at least finally this time it went out when i wasnt 500 miles from home so i can replace it myself... the other 3 all went out on 3 separate road trips, leaving me at the hands of the stealership :/
i am actually probably gonna take some pics and put a sale feeler out soon and either go to the new audi s4, 996-997 porsche 911 TT world or cadillac cts-v as many others have (though i sill want the AWD e63 amg)
at least finally this time it went out when i wasnt 500 miles from home so i can replace it myself... the other 3 all went out on 3 separate road trips, leaving me at the hands of the stealership :/
i am actually probably gonna take some pics and put a sale feeler out soon and either go to the new audi s4, 996-997 porsche 911 TT world or cadillac cts-v as many others have (though i sill want the AWD e63 amg)
Last edited by gaspam; 10-05-2013 at 01:02 AM.