Spring 2014 plans - What are you doing?
#1
Out Of Control!!
Thread Starter
Spring 2014 plans - What are you doing?
Well us northerners are starting to finally see pavement, I guess that means its almost spring?
I'm within a 100 miles of 60k miles so I've ordered some new meaty rubber for my Forgestars(unrelated to 60k mile service), one step colder plugs, S/C oil, Mobil 1 and mann filter. Also need to order a set of Airfilters(not sure what yet). Also started my detail this past weekend, will spend 1 or 2 more weekends on that and still need to pick up the PLM heat exchanger and install that.
what are everyone's plans this spring?
I'm within a 100 miles of 60k miles so I've ordered some new meaty rubber for my Forgestars(unrelated to 60k mile service), one step colder plugs, S/C oil, Mobil 1 and mann filter. Also need to order a set of Airfilters(not sure what yet). Also started my detail this past weekend, will spend 1 or 2 more weekends on that and still need to pick up the PLM heat exchanger and install that.
what are everyone's plans this spring?
#4
Out Of Control!!
Thread Starter
#5
Member
Planning an ECU tune from BIP and a muffler delete before summer. Maybe a new flat-bottom steering wheel as well.
Last edited by Quicksilv3r; 03-17-2014 at 11:49 AM.
#7
MBWorld Fanatic!
Install the Kleemanns I've been sitting on for the past 6 months, split cooling, updated center console and a few maintenance items.
Trending Topics
#8
Senior Member
Already started early for spring colder plugs,77mm FSC installed and tuned by Powerhaus Performance with EC software. 19" cv3's here but getting them customed to my liking.
#9
MBWorld Fanatic!
Join Date: Mar 2011
Location: The Granite State
Posts: 1,835
Likes: 0
Received 12 Likes
on
8 Posts
.
I'm pretty sure I've lost track of the pile of parts that I've accumulated (but never installed). There's a big pile of boxes stacked up in the corner of my garage to open and install like:
-G
- Euro front impact strips to replace "egg yolk" turn signal strips
- EuroTek rear diffuser
- EuroTek Rear Trunk Spoiler
- K-MAC (latest design) front alignment bushing kit
- K-MAC (latest design) rear alignment bushing kit
- Lower the car to preferred ride height via ELMv2
- 4-wheel alignment with proper camber (finally!)
- Shardul Belt Wrap Pulley kit
- ASP 172mm Crank Pulley
- Kleemann Tune to replace EC Tune
- 2003 TCU - For unlimited brakestand burnouts!
- Still need to buy: PLM H/E
-G
#11
Member
Well I am working like a mad man to get mine done in the next two months lol. Working on putting these under the hood....
Making custom headers this week. Just finished moving the ABS pump to another location:-) Made a bracket for the pump.
Had to extend the harness.....
Lots more to do. But working hard to have it done for June!
Making custom headers this week. Just finished moving the ABS pump to another location:-) Made a bracket for the pump.
Had to extend the harness.....
Lots more to do. But working hard to have it done for June!
#12
Out Of Control!!
Thread Starter
I'm pretty sure I've lost track of the pile of parts that I've accumulated (but never installed). There's a big pile of boxes stacked up in the corner of my garage to open and install like:
-G
- Euro front impact strips to replace "egg yolk" turn signal strips
- EuroTek rear diffuser
- EuroTek Rear Trunk Spoiler
- K-MAC (latest design) front alignment bushing kit
- K-MAC (latest design) rear alignment bushing kit
- Lower the car to preferred ride height via ELMv2
- 4-wheel alignment with proper camber (finally!)
- Shardul Belt Wrap Pulley kit
- ASP 172mm Crank Pulley
- Kleemann Tune to replace EC Tune
- 2003 TCU - For unlimited brakestand burnouts!
- Still need to buy: PLM H/E
-G
#13
Out Of Control!!
Thread Starter
Well I am working like a mad man to get mine done in the next two months lol. Working on putting these under the hood....
Making custom headers this week. Just finished moving the ABS pump to another location:-) Made a bracket for the pump.
Had to extend the harness.....
Lots more to do. But working hard to have it done for June!
Making custom headers this week. Just finished moving the ABS pump to another location:-) Made a bracket for the pump.
Had to extend the harness.....
Lots more to do. But working hard to have it done for June!
#14
MBWorld Fanatic!
Join Date: Mar 2011
Location: The Granite State
Posts: 1,835
Likes: 0
Received 12 Likes
on
8 Posts
.
These cars are expensive enough to build...... adding low-quality or unproven componentry just makes the whole process more costly and heartbreaking.
Pay for quality, do it once, do it right.
-G
#15
-Brada BR10's
-Lowering module
-E63 Front Bumper conversion (paint & blackout all trim, badges etc.)
-Diffuser
-Spoiler
-buckhead
5 piece idler
belt wrap kit
clutched pulley & tune
I/C pump
Split cooling kit
-ultimate pedal kit
-Lowering module
-E63 Front Bumper conversion (paint & blackout all trim, badges etc.)
-Diffuser
-Spoiler
-buckhead
5 piece idler
belt wrap kit
clutched pulley & tune
I/C pump
Split cooling kit
-ultimate pedal kit
#16
Member
#17
Member
Join Date: Sep 2013
Location: Niagara Region
Posts: 127
Likes: 0
Received 0 Likes
on
0 Posts
\
H&R springs, Alignment, Niche Targa with brand new Michelin pss, getting all installed and done on Friday, then I will change oil on Saturday and will be done for a while, I hope!
#19
#21
Member
yea I think you're good for a while broski. I'm gonna take some pictures of my steering wheel tonight, post a feeler/fs and see what kind of interest it pulls. If I can sell it, I'll take yours off your hands.
Last edited by Quicksilv3r; 03-17-2014 at 02:51 PM.
#22
Out Of Control!!
Thread Starter
#25
Well it was going to read.....
Lowering Blocks
New 20" Wheels
Long Tubes
Muffler and 2nd Cat delete
ECU tune
Front Hand of God
Rear carbon spoiler
Rear Defuser
Blacked out Grille
Carbon wrap on all chrome
Window tint
Now I say, paid for new Head Stud repair and rear air bag repair..........
Ain't winter a *****....
Lowering Blocks
New 20" Wheels
Long Tubes
Muffler and 2nd Cat delete
ECU tune
Front Hand of God
Rear carbon spoiler
Rear Defuser
Blacked out Grille
Carbon wrap on all chrome
Window tint
Now I say, paid for new Head Stud repair and rear air bag repair..........
Ain't winter a *****....