**FS**Speedriven m113k Audi 82m TB Plate/Diy
#1
Thread Starter
Banned
**FS**Speedriven m113k Audi 82m TB Plate/Diy
SpeedrivenAudi 82mm TB Adapter Plate
We now offer 82mm adapter plates for your m113k motor's. Cnc'd and matched perfectly for a plug(weld) and play setup. Tapped and ready for stock bolts.
$70+shipping
Either pm us or email us at info@speedriven.com or call us
Quick Diy!
Unlike the mb flange layout, the audi flanges are symmetrical. You will need to weld the flange up to the tb snout. Get it on the tb snout as straight as possible.
Basically square with the snout, just like oem
Now weld the flange on.
You will have some shaving to do. Clear out the ring by grinding it down
And now you have a free flowing tb snout fitted for your audi tb
We now offer 82mm adapter plates for your m113k motor's. Cnc'd and matched perfectly for a plug(weld) and play setup. Tapped and ready for stock bolts.
$70+shipping
Either pm us or email us at info@speedriven.com or call us
Quick Diy!
Unlike the mb flange layout, the audi flanges are symmetrical. You will need to weld the flange up to the tb snout. Get it on the tb snout as straight as possible.
Basically square with the snout, just like oem
Now weld the flange on.
You will have some shaving to do. Clear out the ring by grinding it down
And now you have a free flowing tb snout fitted for your audi tb
#4
Out Of Control!!
Lol sad but true. $525 but who's counting
#5
MBWorld Fanatic!
I'm not sure if I want to go with the 82 or 90. Going to install aftermarket fuel pumps/filters etc, aquamist, and the TB this fall/winter.
Last edited by jmb614; 08-15-2014 at 01:15 PM.
#6
Thread Starter
Banned
You use your stock snout.
Either way you are welding the audi flange or Mercedes.
Sounds like your after some serious power!
#7
MBWorld Fanatic!
Trending Topics
#10
Thread Starter
Banned