Need help with SDS, in Limp Mode
Thread Starter
MBWorld Fanatic!
Joined: Sep 2006
Posts: 1,946
Likes: 21
From: So Cal
CLK Cabrio
Need help with SDS, in Limp Mode
Hey guys, I have a question or request really. My car is in Limp Mode after having my turbine speed sensor go out on the way back from SF
. I replaced the parts and got everything up and running. However the car is still in Limp Mode (stuck in 1st). I just bought an SDS and know that you guys are the most active with using the MB Star system. I purchased a C4, how do I reset the module? your help is greatly appreciated
.
. I replaced the parts and got everything up and running. However the car is still in Limp Mode (stuck in 1st). I just bought an SDS and know that you guys are the most active with using the MB Star system. I purchased a C4, how do I reset the module? your help is greatly appreciated.
MBWorld Fanatic!
Joined: Dec 2011
Posts: 4,599
Likes: 102
From: Florida
A Merc
https://mbworld.org/forums/attachmen...eset-trans.pdf
Once in there you will clear the fault code also as shardul said
Once in there you will clear the fault code also as shardul said
