W211 AMG Discuss the W211 AMG's such as the E55 and the E63
Sponsored by:
Sponsored by:

Dynod for base line numbers

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old 03-25-2016, 02:26 PM
  #1  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Dynod for base line numbers

Took the car to the dyno yesterday to get some base line numbers before I upload EC tune and throw her back on to see the real gain from just a tune..
I can tell you that these cars are runing pig rich at 10.0 from the factory
Will keep this thread updated if the tune doesn't bring some good numbers?? I have kit ready to go on, will run it on stock tune as it will lean out with the juice. I guess we'll see depends what EC tune is suppose to be AFR wise.
Attached Thumbnails Dynod for base line numbers-image.jpeg  
The following users liked this post:
C_Note (11-16-2020)
Old 03-25-2016, 05:33 PM
  #2  
MBWorld Fanatic!
 
Ls1toAMG's Avatar
 
Join Date: Dec 2014
Location: Indianapolis
Posts: 1,236
Received 71 Likes on 64 Posts
2004 E55.98 SS Camaro.Jetta TDI. Expedition
What kind of dyno? Numbers look fairly normal. 390-410 on a dynojet is common.
Defiantly keep us posted on your future mods and dynos to compare. I'm interested in the NOS numbers for sure..
Old 03-25-2016, 05:39 PM
  #3  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by Ls1toAMG
What kind of dyno? Numbers look fairly normal. 390-410 on a dynojet is common.
Defiantly keep us posted on your future mods and dynos to compare. I'm interested in the NOS numbers for sure..
Dynojet. Dyno run in 3rd gear I'm pretty happy with the results. My old E was badass but then again it was modded to the maximum. Going to keep it simple this time around "pulley pump HX nitrous tune".. Btw your buddy never got in touch with me for the pulley

Last edited by 03svtkiller; 03-27-2016 at 09:23 AM.
Old 03-25-2016, 08:03 PM
  #4  
MBWorld Fanatic!
 
Ls1toAMG's Avatar
 
Join Date: Dec 2014
Location: Indianapolis
Posts: 1,236
Received 71 Likes on 64 Posts
2004 E55.98 SS Camaro.Jetta TDI. Expedition
Originally Posted by 03svtkiller
Dynojet. Dyno run in 4th gear I'm pretty happy with the results. My old E was badass but then again it was modded to the maximum. Going to keep it simple this time around "pulley pump HX nitrous tune".. Btw your buddy never got in touch with me for the pulley
Sorry. PM Shardul an offer on a 77mm pulley.
Old 03-25-2016, 10:54 PM
  #5  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by Ls1toAMG
Sorry. PM Shardul an offer on a 77mm pulley.
LOL @shardul I'd rather eat S*** then buy anything from him.
Old 03-25-2016, 11:55 PM
  #6  
MBWorld Fanatic!
 
Ls1toAMG's Avatar
 
Join Date: Dec 2014
Location: Indianapolis
Posts: 1,236
Received 71 Likes on 64 Posts
2004 E55.98 SS Camaro.Jetta TDI. Expedition
Originally Posted by 03svtkiller
LOL @shardul I'd rather eat S*** then buy anything from him.
He thanked me for the tip. I sent him another message.
Old 03-27-2016, 02:17 AM
  #7  
MBWorld Fanatic!
 
RedBullJnky's Avatar
 
Join Date: Jul 2010
Location: Streets of SoFlo
Posts: 4,921
Received 9 Likes on 9 Posts
you to Hate
So you're trying to reinvent the wheel?? Good for you! Lol. This time, don't let your wife drive it.
Old 03-27-2016, 09:23 AM
  #8  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by RedBullJnky
So you're trying to reinvent the wheel?? Good for you! Lol. This time, don't let your wife drive it.
Reinvent the wheel?? not really sure what you mean by that.
Lol it's a "family" car of course she can drive it, imagine if I said no boy o boy I think she'd purposely crash it
Old 03-27-2016, 11:56 AM
  #9  
MBWorld Fanatic!
 
BlownV8's Avatar
 
Join Date: Aug 2003
Location: In my garage
Posts: 8,546
Received 1,065 Likes on 854 Posts
E55, GLS450, GL63, GLE350
Dyno in 4th gear. 3rd gear will give you torque multiplication due to gearing.
Old 03-27-2016, 01:15 PM
  #10  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by BlownV8
Dyno in 4th gear. 3rd gear will give you torque multiplication due to gearing.
Will do
Old 03-27-2016, 01:44 PM
  #11  
MBWorld Fanatic!
 
RedBullJnky's Avatar
 
Join Date: Jul 2010
Location: Streets of SoFlo
Posts: 4,921
Received 9 Likes on 9 Posts
you to Hate
Originally Posted by 03svtkiller
Reinvent the wheel?? not really sure what you mean by that.
Lol it's a "family" car of course she can drive it, imagine if I said no boy o boy I think she'd purposely crash it
I was just messing with you. But I know what you're talking about. I think my wife wants to burn mine to the ground. Lol.

But if I could start over, I would do HE, gears, lsd, meth and tune. And call it a day.
Old 03-27-2016, 04:41 PM
  #12  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by RedBullJnky
I was just messing with you. But I know what you're talking about. I think my wife wants to burn mine to the ground. Lol.

But if I could start over, I would do HE, gears, lsd, meth and tune. And call it a day.
You still got yours?
Old 03-27-2016, 05:16 PM
  #13  
MBWorld Fanatic!
 
RedBullJnky's Avatar
 
Join Date: Jul 2010
Location: Streets of SoFlo
Posts: 4,921
Received 9 Likes on 9 Posts
you to Hate
Originally Posted by 03svtkiller
You still got yours?
Lol. Yup
Old 03-27-2016, 07:02 PM
  #14  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by RedBullJnky
Lol. Yup
Nice! Did you get it fixed? What's the plan, same setup as before?
Old 03-27-2016, 07:59 PM
  #15  
MBWorld Fanatic!
 
RedBullJnky's Avatar
 
Join Date: Jul 2010
Location: Streets of SoFlo
Posts: 4,921
Received 9 Likes on 9 Posts
you to Hate
Originally Posted by 03svtkiller
Nice! Did you get it fixed? What's the plan, same setup as before?
Well, since there was no frame damage, I rebuilt it. We used all OEM parts except for the E63 conversion I got from Gary. The setup is still the same, but it's on 22psi now.
The plan is to run the **** out of it. I have too much blood, sweat, and money into it.
Old 03-27-2016, 08:40 PM
  #16  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by RedBullJnky
Well, since there was no frame damage, I rebuilt it. We used all OEM parts except for the E63 conversion I got from Gary. The setup is still the same, but it's on 22psi now.
The plan is to run the **** out of it. I have too much blood, sweat, and money into it.
Nice the TT lives another day can't wait to see what it runs now that you turned it up
I can only imagine, no wonder your wife wants to burn it down lol
Old 03-28-2016, 03:47 PM
  #17  
MBWorld Fanatic!
 
JoeNobody's Avatar
 
Join Date: Dec 2011
Posts: 1,226
Likes: 0
Received 23 Likes on 21 Posts
Mercedes
I didn't know RBJ's turbo E55 was back in action! Good to know! Did you dyno it at 22psi?
Old 03-28-2016, 06:05 PM
  #18  
MBWorld Fanatic!
 
Hulk's Avatar
 
Join Date: Dec 2011
Location: Florida
Posts: 4,599
Received 102 Likes on 90 Posts
A Merc
Svt spray it down baby
Old 03-28-2016, 06:30 PM
  #19  
Super Member
Thread Starter
 
03svtkiller's Avatar
 
Join Date: Jul 2014
Posts: 735
Received 5 Likes on 5 Posts
2011 Cadillac CTS-V
Originally Posted by Hulk
Svt spray it down baby
I got Jesus in my bottle you know he gon bring it
Old 03-28-2016, 10:31 PM
  #20  
MBWorld Fanatic!
 
Hulk's Avatar
 
Join Date: Dec 2011
Location: Florida
Posts: 4,599
Received 102 Likes on 90 Posts
A Merc
lol

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Dynod for base line numbers



All times are GMT -4. The time now is 01:46 PM.