W211 E63 Wheels help
Thread Starter
Super Member
Joined: Sep 2008
Posts: 745
Likes: 11
From: Wilmington, NC
2012 C63 Black Series, 2003 Hummer H1 KSC2, 2003 Hummer H1 HMCO, 1997 Hummer H1 HMC4, 1969 Jaguar E
W211 E63 Wheels help
Ok, so its been a few years since I had my E55 and my C63 so Im not really up on the wheels game these days.
Im thinking about picking up a 2007 W211 E63 and want your wheel expertise....
I want to run a very aggressive (like CLS wheels on w211 aggressive) 20" concave wheel on this car which will have stock suspension... now this is where you guys come in.....
What specs do I need to look for on width and offset. Im not looking to drop big $$ on these wheels so any insight you have on wheel brands that don't break the bank and fit these cars would be great.
Thanks for all your help
Im thinking about picking up a 2007 W211 E63 and want your wheel expertise....
I want to run a very aggressive (like CLS wheels on w211 aggressive) 20" concave wheel on this car which will have stock suspension... now this is where you guys come in.....
What specs do I need to look for on width and offset. Im not looking to drop big $$ on these wheels so any insight you have on wheel brands that don't break the bank and fit these cars would be great.
Thanks for all your help
SPONSOR
Joined: Sep 2014
Posts: 3,647
Likes: 818
From: Worldwide
2007 Mercedes E63 AMG
you'll be able to fit the factory CLS wheels. if you run aftermarket CLS wheels you'll have a bit of a fitment issue. CLS can fit quite a bit more wheel and tire under their rear fenders than the w211
i personally run Vossen CV-5's in the CLS fitment. rear tires rubs/rubbed really badly. i have UPD arms and maxed them out at -3.2 degrees which gave me clearance with my 285mm tires. 275mm tires would have cleared, but without the arms the outer rim lip comes into contact with the rear fenders at full suspension compression which I've experienced. even with the UPD arms maxed out my 285mm tires do come into contact with the inner part of the rear bumper and has rubbed off quite a bit of plastic from the inside. This is all with my car at SPORT2 setting. I haven't lowered yet using my ELM.
CLS W219 Fitment
20x9 e25
45/30ZR-20 HANKOOK VENTUS V12 EVO2 XL
20x10.5 e30
285/30ZR-20 HANKOOK VENTUS V12 EVO2 XL
i personally run Vossen CV-5's in the CLS fitment. rear tires rubs/rubbed really badly. i have UPD arms and maxed them out at -3.2 degrees which gave me clearance with my 285mm tires. 275mm tires would have cleared, but without the arms the outer rim lip comes into contact with the rear fenders at full suspension compression which I've experienced. even with the UPD arms maxed out my 285mm tires do come into contact with the inner part of the rear bumper and has rubbed off quite a bit of plastic from the inside. This is all with my car at SPORT2 setting. I haven't lowered yet using my ELM.
CLS W219 Fitment
20x9 e25
45/30ZR-20 HANKOOK VENTUS V12 EVO2 XL
20x10.5 e30
285/30ZR-20 HANKOOK VENTUS V12 EVO2 XL
Last edited by hachiroku; Oct 25, 2016 at 04:18 AM.
Thread Starter
Super Member
Joined: Sep 2008
Posts: 745
Likes: 11
From: Wilmington, NC
2012 C63 Black Series, 2003 Hummer H1 KSC2, 2003 Hummer H1 HMCO, 1997 Hummer H1 HMC4, 1969 Jaguar E
SPONSOR
Joined: Sep 2014
Posts: 3,647
Likes: 818
From: Worldwide
2007 Mercedes E63 AMG
