Wheel adapter question....
#1
Junior Member
Thread Starter
Wheel adapter question....
Ok, so I have been searching for wheels for my E55 and just not finding much that I like. I have a set of wheels that were on one of my BMW just sitting in storage. I know the wheels are 5x120 and the E55 is 5x112. Which wheel adapters (makers) would you fellas recommend? Would you recommend wheel adapters? What specifics would I need for the correct fitment?
#2
MBWorld Fanatic!
Join Date: Jan 2016
Location: In the Shadow of the Tetons
Posts: 2,177
Received 660 Likes
on
477 Posts
2013 ML350 Bluetec
Someone will surely correct me if I'm mistaken, but there's also offset to consider. That is, how far the outside edge of the rim is from the inside surface of the mounting hub. I believe the offset for my E320 is 40mm; I'm sure the E55 is different given the differences in front/rear tire sizes.
#3
MBWorld Fanatic!
Join Date: Jan 2010
Location: Richmond, CA
Posts: 3,250
Received 255 Likes
on
233 Posts
2001 E320 Wagon, 2006 LBZ Silverado, 2007 E63 (sold), 2001 E55 (sold)
You need to know the offset of the wheels to figure this out. A lot of the time the offset will be marked on the back of the wheels.