time to mod
#1
Super Member
Thread Starter
time to mod
ok, can't leave my cars alone.
SO first off looking into new wheels.
Most likely going back and getting a set of COR forged wheels. I had a set from them on my w211 E63 and was very impressed with the build quality and look. I actually never bent a wheel which I bent three other sets of wheels on the same car.
I am also looking at their other brand Axiom which is tuner inspired wheel with race prep. Guess it means its lighter.
here is my options
Pic 1- Cor 20 inch slight concave with step lip- Its called the Encor- like the wide split 5 spoke
pic 2- Axiom- FM501- Mono block with light concave
pic 3- Axiom- AX- Ms01- 10 spoke wheel- like the look and very similar to my stock AMG wheels
what do you guys think
SO first off looking into new wheels.
Most likely going back and getting a set of COR forged wheels. I had a set from them on my w211 E63 and was very impressed with the build quality and look. I actually never bent a wheel which I bent three other sets of wheels on the same car.
I am also looking at their other brand Axiom which is tuner inspired wheel with race prep. Guess it means its lighter.
here is my options
Pic 1- Cor 20 inch slight concave with step lip- Its called the Encor- like the wide split 5 spoke
pic 2- Axiom- FM501- Mono block with light concave
pic 3- Axiom- AX- Ms01- 10 spoke wheel- like the look and very similar to my stock AMG wheels
what do you guys think
#5
Former Vendor of MBWorld
How about some suggestions from us?
All of these are available in any of our configurations (straight face, concave, deep concave, monoblock) and a wide variety of color finishes. Plus we've done a few MB cars with some of these over the years, if you are interested, I'll send a few shots over as PM so we don't flood the thread.
All of these are available in any of our configurations (straight face, concave, deep concave, monoblock) and a wide variety of color finishes. Plus we've done a few MB cars with some of these over the years, if you are interested, I'll send a few shots over as PM so we don't flood the thread.
Trending Topics
#8
Former Vendor of MBWorld
Hey, what sizing would you want to go with? Generally forged wheels are lighter, but depends on model and size. We have a LitePack option available for some of our wheel designs where we lose some extra weight.
We got some renderings done for one customer, first is CV2 Deep Concave, second is MB1 as Dan mentioned earlier. Color finishes are more than a few, but we can advise on which to take depending on your ideas
We got some renderings done for one customer, first is CV2 Deep Concave, second is MB1 as Dan mentioned earlier. Color finishes are more than a few, but we can advise on which to take depending on your ideas
Last edited by D2FORGED; 06-15-2012 at 03:59 PM.
#10
Former Vendor of MBWorld
Sure is and it is light! Check the specs sheet! With a monoblock configuration of this same wheel, it would be a pretty dope addition to the E63 in any way!
#11
Senior Member
#12
Member
Join Date: Jul 2004
Location: Tucson, AZ
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
'15 E63S P30
Hey, what sizing would you want to go with? Generally forged wheels are lighter, but depends on model and size. We have a LitePack option available for some of our wheel designs where we lose some extra weight.
We got some renderings done for one customer, first is CV2 Deep Concave, second is MB1 as Dan mentioned earlier. Color finishes are more than a few, but we can advise on which to take depending on your ideas
We got some renderings done for one customer, first is CV2 Deep Concave, second is MB1 as Dan mentioned earlier. Color finishes are more than a few, but we can advise on which to take depending on your ideas
#14
Former Vendor of MBWorld
#15
Senior Member
#16
Senior Member
Join Date: Jan 2005
Location: Singapore/Central London UK
Posts: 336
Likes: 0
Received 0 Likes
on
0 Posts
E63 biturbo
U have details of pricing and weight for 20"? Very nice design, perfect for the W212!
Last edited by Jspeed; 06-18-2012 at 07:02 AM.