Dashcommand (Torque) App discrepancy
Thread Starter
Super Member
Joined: Oct 2014
Posts: 505
Likes: 39
2016 E63s Wagon - CCB & CF package
Dashcommand (Torque) App discrepancy
I noticed that my OBD2 DashCommand (same as Torque) app usually shows my coolant temp as approximately 20 degrees F higher than what it says on the dash. My dash usually shows water temp around 199-200, yet the app is always around 220*F. How could this be? I ask because 220 is a bit high i think... 199 makes more sense considering the cold weather now a days, but i am confused by the disrepancy
MBWorld Fanatic!
Joined: May 2010
Posts: 1,227
Likes: 185
From: Chicago
E63 SL55 996TT C5Z06
I noticed that my OBD2 DashCommand (same as Torque) app usually shows my coolant temp as approximately 20 degrees F higher than what it says on the dash. My dash usually shows water temp around 199-200, yet the app is always around 220*F. How could this be? I ask because 220 is a bit high i think... 199 makes more sense considering the cold weather now a days, but i am confused by the disrepancy
I also have never figured out how to get an accurate HP reading from it with the m157 /4matic. It always reads much higher than true 577 HP stock. On my c32 (RWD / superhardlged) the HP readings were pretty close to what dyno showed.
Thread Starter
Super Member
Joined: Oct 2014
Posts: 505
Likes: 39
2016 E63s Wagon - CCB & CF package
