Front bumber -trim : install/removal question
#1
Thread Starter
Member
Joined: Mar 2008
Posts: 161
Likes: 19
From: Canada
E63S 2016 [W212 ] :::: E55 2002 [W210 ] [31k miles] ::: TARGA4S 2007 [ 997.1 ]
Front bumber -trim : install/removal question
HI, I am having item 23 , which is carbon fiber , replaced under warranty. Does anyone know, if , in order to remove item 23, item 1 must be removed?
The reason I ask is , I may have item 1 replaced [ on my own dime] as it has scratches etc.
I figure I can save on the install time for item 1 since it has to come off anyway for item 23?
The reason I ask is , I may have item 1 replaced [ on my own dime] as it has scratches etc.
I figure I can save on the install time for item 1 since it has to come off anyway for item 23?
#3
Out Of Control!!
Joined: Jun 2004
Posts: 12,160
Likes: 2,224
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
I thought in another thread we established that 26 can come out by using a trim tool and unclipping it
that being said I would venture to guess that having #1 off -- the front bumper cover -- would make everything with the trim easier
$0.02
that being said I would venture to guess that having #1 off -- the front bumper cover -- would make everything with the trim easier
$0.02
#4
Thread Starter
Member
Joined: Mar 2008
Posts: 161
Likes: 19
From: Canada
E63S 2016 [W212 ] :::: E55 2002 [W210 ] [31k miles] ::: TARGA4S 2007 [ 997.1 ]
The other thread was for 23.
23 was a small chip, so I wanted to change it myself possibly.
26 is carbon fiber , which is warranty issue,