Motor mount suggestions...
#1
Junior Member
Thread Starter
Motor mount suggestions...
Looking to replace motor mounts. Seems ECE is out of stock and won’t be back in stock for the foreseeable future (other projects they’re working on). I did watch one c63 owner who complained about some rattles after they installed and I definitely don’t want that. I think living in a climate that can go from 0f to 100f during the year may reek havoc with polyurethane but I could be wrong. I then found suggestions for the Black Series but not sure they fit on the w212. Are there others or am I limited to stock engine mounts? Thanks in advance for the suggestions.
#2
Out Of Control!!
Join Date: Jun 2004
Posts: 11,711
Received 2,036 Likes
on
1,420 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
Just do stock OEM mounts -- best ride quality and yes if you're launching hard they'll wear out sooner but so what
The following users liked this post:
Anotherone (02-12-2021)
#3
Senior Member
#4
Junior Member
Thread Starter
#5
Member
#6
Junior Member
Thread Starter
Is that book or straight time...
I thought it was more like a 4-6 hour job. The challenge with the ece is they aren’t available and may not be again for a while. Which seems kind of crazy to me but it is what it is.
Trending Topics
#8
Member
![](https://cimg6.ibsrv.net/gimg/www.mbworld.org-vbulletin/960x540/146998958_2762156660711463_1758385117939572223_n_50_47038ddf5c5b3aba12918359ef4edab5a5939ba3.jpg)
The following users liked this post:
E63_SauceGod (02-17-2021)
#10
#11
Super Member
![](https://staticssl.ibsrv.net/autocomm/EvoM/fcotmicon.gif)
I guess...I'm not one to spend that kind of money for such a minimal gain[$4k for MAYBE 40 hp/tq?!?], so I wouldn't be using the Weistec brackets anyway. No big loss here... There are much better gains to be made for far less credits.