Ceramic Pro
Thread Starter
Newbie
Joined: Sep 2018
Posts: 1
Likes: 0
2016 BMW X5
Ceramic Pro
My E63s in Selenite Gray Magno (matte) is due in the first week in December. I have used Ceramic Pro on my two previous vehicles, one being an E43 in Black. It looked great and washing the vehicle was a snap.
However, I am concerned about using Ceramic Pro on matte paint. I received the following response to my inquiry from Ceramic Pro: "matte paint will display high spots and be much more difficult to correct if not done properly. The process with regular paint, high spotting can be fixed, but with matte finishes that can't really be achieved. I would make sure you are confident in the installer who will be doing the coating before having them do so."
Has anyone had experience using Ceramic Pro, CQuartz or Opticoat-Plus on their matte paint MB's? Any problems? Recomendations?
However, I am concerned about using Ceramic Pro on matte paint. I received the following response to my inquiry from Ceramic Pro: "matte paint will display high spots and be much more difficult to correct if not done properly. The process with regular paint, high spotting can be fixed, but with matte finishes that can't really be achieved. I would make sure you are confident in the installer who will be doing the coating before having them do so."
Has anyone had experience using Ceramic Pro, CQuartz or Opticoat-Plus on their matte paint MB's? Any problems? Recomendations?
