The Life and Journey of a 2023 Mercedes-AMG E63 S Wagon
The following users liked this post:
Drone_S213 (07-21-2024)
#429
MBWorld Fanatic!
Join Date: Jul 2013
Location: Toronto, Ont, Canda
Posts: 2,412
Received 694 Likes
on
529 Posts
go fast grocery getter wagon
Last edited by bobblehead; 07-21-2024 at 12:53 PM.
#432
MBWorld Fanatic!
Thread Starter
Agree here's the thing. I have Xpel on some panels and now Llumar on others which is more hydrophobic. And then doors and roof and A-pillars and D? pillars are raw paint that has been getting non-ceramic sealing which doesn't last as long as I'd like. So the idea is the full car ceramic will make it all bead/look the same and protect the un-ppf'd stuff from bird ****.
We will see! Maybe it is a waste...
We will see! Maybe it is a waste...
#435
Junior Member
Agree here's the thing. I have Xpel on some panels and now Llumar on others which is more hydrophobic. And then doors and roof and A-pillars and D? pillars are raw paint that has been getting non-ceramic sealing which doesn't last as long as I'd like. So the idea is the full car ceramic will make it all bead/look the same and protect the un-ppf'd stuff from bird ****.
We will see! Maybe it is a waste...
We will see! Maybe it is a waste...
The following users liked this post:
Drone_S213 (07-21-2024)
The following users liked this post:
bobblehead (07-21-2024)
#437
Member
@I.T. Guy,
With your recent suspension "issues", would you still recommend the CETE module for anyone looking to lower their E63? Since I'm still posted here in Germany, I figured now would be the ideal time to pick one up (and potentially have it installed by CETE themselves).
Mike
With your recent suspension "issues", would you still recommend the CETE module for anyone looking to lower their E63? Since I'm still posted here in Germany, I figured now would be the ideal time to pick one up (and potentially have it installed by CETE themselves).
Mike
The following users liked this post:
I.T. Guy (07-23-2024)
#438
MBWorld Fanatic!
Thread Starter
@I.T. Guy,
With your recent suspension "issues", would you still recommend the CETE module for anyone looking to lower their E63? Since I'm still posted here in Germany, I figured now would be the ideal time to pick one up (and potentially have it installed by CETE themselves).
Mike
With your recent suspension "issues", would you still recommend the CETE module for anyone looking to lower their E63? Since I'm still posted here in Germany, I figured now would be the ideal time to pick one up (and potentially have it installed by CETE themselves).
Mike
Since setting the "return to stock speed" to 90kph instead of 50kph the _only_ time I have encountered the error again was while crossing 90kph while at the same time hitting a massive dip. I'm now confident all the error issues were due to the fact that I had the "return to stock speed" set at 50kph so while city driving above/below 50kph so frequently the car was transitioning to new parameters at the same time as hitting dips/turning and leaning aggressively/hitting bumps right when/soon after it was transitioning up/down in height. I was confusing the Mercedes by changing height while the car was dynamically moving. In essence I kept moving the goalposts of the range the MB computer would think is normal operating range while the suspension was moving up and down from the road outside the new range setting that was just implemented.
So yes it's a good system and since I've set it at 90kph to "return to stock eight" I've only had that one error crossing the 90kph threshold at the same time as hitting a big dip.
Now we will see how long it takes to wear the insides of the tires since I drive in the city all week lowered.
Last edited by I.T. Guy; 07-23-2024 at 11:03 AM.
The following users liked this post:
LMinn (07-23-2024)
The following users liked this post:
LMinn (07-26-2024)
#441
Out Of Control!!
Join Date: Jun 2004
Posts: 11,869
Received 2,083 Likes
on
1,454 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
Is that an NEC Multisync monitor 😂
#442
MBWorld Fanatic!
Thread Starter
Yes "Dump" = transfer station including recycling, I just call it "the dump".
High-Five!
They also had some Seagate SCSI Ultra 320 Cheetah hard drives and a US Robotics Modem w/original mint box.
LOL
High-Five!
They also had some Seagate SCSI Ultra 320 Cheetah hard drives and a US Robotics Modem w/original mint box.
LOL
#443
Out Of Control!!
Join Date: Jun 2004
Posts: 11,869
Received 2,083 Likes
on
1,454 Posts
2014 E63S; AMS 100 octane ecu tune; edok tcu tune; BB intakes; dyno tuned
The following users liked this post:
I.T. Guy (07-27-2024)
The following 2 users liked this post by TugboatBill:
I.T. Guy (07-27-2024),
PeterUbers (07-26-2024)
The following users liked this post:
I.T. Guy (07-28-2024)
The following users liked this post:
I.T. Guy (07-28-2024)
#448
Super Member
Join Date: Mar 2022
Location: South by Southwest
Posts: 519
Received 204 Likes
on
157 Posts
2021 AMG E63s Wagon
Dream Wheels from Eglinton
Tens of millions of Dollars that is still missing from the 2023 Toronto International Airport Heist?
None of the money was recovered from the Lufthansa heist either in 1978 but I had an Alibi since was taking Final Exams at the University of Rochester and not yet home by JFK Airport...lol
None of the money was recovered from the Lufthansa heist either in 1978 but I had an Alibi since was taking Final Exams at the University of Rochester and not yet home by JFK Airport...lol
The following users liked this post:
I.T. Guy (07-28-2024)
#449
MBWorld Fanatic!
Thread Starter
Good point on the poison gas. Hadn’t considered that. Thank you.
Luckily both times I only drove for a couple blocks. It’s a 2 min drive from the warehouse to the lake house. If I have to do it again I’ll keep the windows down. I think that’ll suffice.
So close!
Luckily both times I only drove for a couple blocks. It’s a 2 min drive from the warehouse to the lake house. If I have to do it again I’ll keep the windows down. I think that’ll suffice.
So close!
Last edited by I.T. Guy; 07-28-2024 at 09:25 PM.
The following users liked this post:
LMinn (07-31-2024)