Kelvin07

I'm taking delivery on Friday, YES!!!

I emailed Eurocharged, got little feedback from a fella named Jerry, so I am going directly to people that know best... you guys.

My car seems bone stock, will take it to the Dyno to test on Saturday or Monday, I have about $8k to invest in performance mods...

I already have V2 ELM.

Please advise, what would should I do that is good value for a CLS55?

loungn14

your going to love the car!

Jerry knows his stuff, and we have tuned the fastest 55 series car out there!

Our stage 3 package is only $6800 and includes the following:

Eurocharged CLS55 Performance Engine Software
Eurocharged 180mm Crank Pulley Kit
Kleemann Headers
82mm Throttle Body Kit
Upgraded Injectors
CLS55 Heat Exchanger
Johnson CM30 I/C Pump
Eurocharged TCU tune (free with package this month)

Your 8k budget should allow for install as well!

No one will come close to our pricing yet alone give ya a one stop shop!

So please look around and do the homework! Im sure you will love the car even more after your done modding!



good recent link for ya!

kustom2k1

You didn't mention fuel rail..not needed with the combo listed above?

loungn14

personal preference, working within his budget thats what the package included, but fuel rail is good to have.

We have many customers running that setup with just the upgraded injectors...

kustom2k1

Thanks L.

Kelvin07

I was going to ask about that, I've been reading a lot about fuel injectors.

Where can I buy the TTM FUELING KIT?

Budgets are like water my friends... Hehe

loungn14

smart man...

Bruce at ttm motorsport can hook you up, or we can get them from him as well and add it to your package price.

He uses different injectors on his setup and they are top of the line.

Kelvin07

I would like that very much, would you please quote me the updated stage 3 package including TTM's fueling kit

loungn14

sure, shoot me over an email to jake@eurocharged.com and we can get that for ya.

Jake

Saeedg48

full exhaust and pulls for sure.

keksixsigma

It's neverending, when you do the fuel rail, and 82mm you may want to do a trunk tank to keep from getting heat soaked as this package puts out well over 550 to the wheels with Jerry's tune.

I have: kleemans, 180 asp, K&N filters, TTM 82mm & fuel rail with 550cc injectors, Jerry ECU TCU dyno tune, EC heat exchanger, EC pump, trunk tank (Shardul), and cat and resonator delete -3" straight to muffs, (resonator delete is a matter of taste because the cls's are much louder with this setup than the E55's as muffs are different-imagine rumble at part throttle and full blown Devil's roar at full throttle that I've yet to hear matched).

Fuel rail is for longevity as the #8 cylinder on these cars can get starved and tend to wear first.
***ALSO VERY IMPORTANT####
Make sure you have an experienced shop with these mods do your install of your Pulley, all the rest is cake compared the nightmares you'll have if your pulley falls off, trust me.

Still its worth it when it's done, you'll have a monster, and leave a trail of M3's, vettes, stangs, gallardos, and even a GSXR 750 or 2 with hurt feelings about their rides. Not that I would know anything about that.

Kelvin07

Wow!, that is a lot of good advice right there, thank you so much ny friend!

As far is my mods go, I will have Bruce/TTM conduct everything, I will be shipping my car over to TTM's shop in NYC.

Bruce and I will be deciding over the next few weeks precisely what we're going to do with my car, Bruce has some great ideas to go with superb customer service.

I'll probably end up doubling my initial estimate, if not more than that.

TTMotorsports

I am very excited and honored to build a one-of-kind CLS for you Kelvin. This will be an EPIC build with your vision and a little bit of insight from TTM. You are a true enthusiast and I know your decisions on wjhat we do will give you EXACTLY what you want. The BADDEST A$$ CLS in Costa Rico!! Can't wait!!


Guys-
Kelvin is a quality, stand up person and the utmost information junkie to base his decisions on research and advice. It started out with just some performance mods but now we are planning on doing the complete interior, powder coating calipers, wheels, possible body kit and CRAZY performance upgrades that will be INCREDIBLE!!!

TTMotorsports

Kelvin07

Kelvin07

Thanks Bruce, likewise!, and I gotta say, your attention to detail and your knowledge is downright scary bud!.
It took me one call and I was sold, hand on heart, I mean, you took OVER AND HOUR on what we could potentially do and how every mod would improve my car, seriously... who else does that?, and by reading the forum, I know you do this all the time, like you told me and I quote "I build awesome cars, for the best clients in the world". WORD!.

cmusngi

Congrats on the new ride Kelvin! $8K in mods is going to bring the biggest smile to your face. You're definitely in great hands with Bruce! I look forward to seeing all the power unleashed in your ride!


.

TopEndS62

Shipping the car from Costa Rica to NYC. Now thats what I call a man who wants quality work. Good luck man your in good hands.

Kelvin07

Exactly!... I would like THE BEST results...

hoolamonster

MBH Headers are the best place to start! No other header is near the quality. APS & Evotech Tune! (only go for the best with your benz!!!) GL