BBS LM Reps wont fit
#1
Member
Thread Starter
Join Date: Dec 2006
Location: London - England
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
C180 Kompressor Saloon
BBS LM Reps wont fit
i have a w203 and i have bought a set of BBS LM Reps
5x112
19x8.5 ET35
19x9.5 ET35
but they dont fit.
i did a trial fit on the front and the caliper is hitting the wheel and it looks like the middle bit of the hub is touching the centre of the rim and also tries the back wheel and the back of the wheel is hitting the caliper
it looks like i will need 25mm hub centric spacers and a 72.1-66.6 spigot rings
has anyone done any of this?
5x112
19x8.5 ET35
19x9.5 ET35
but they dont fit.
i did a trial fit on the front and the caliper is hitting the wheel and it looks like the middle bit of the hub is touching the centre of the rim and also tries the back wheel and the back of the wheel is hitting the caliper
it looks like i will need 25mm hub centric spacers and a 72.1-66.6 spigot rings
has anyone done any of this?
#5
Member
Thread Starter
Join Date: Dec 2006
Location: London - England
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
C180 Kompressor Saloon