ride problem after installing lowering spring
Thread Starter
Member
Joined: Jun 2009
Posts: 93
Likes: 0
From: Jakarta - Indonesia
W210 - V6'02 / W163 - V6'02
ride problem after installing lowering spring
need advise ..... i replaced stock spring on my w210 with H&R lowering spring and currently has set of 19x8.5/9.5 wheels on it.
the ride is good on smooth tarmac, but when i hit a small bumps above 35mph, i can feel the car landed a bit side ways. i can feel that problem the most when the bump is on the left side.
already went back to the spring shop and also done wheel alignment, but they said nothing is wrong and the rear suspension is fixed.. so there is nothing to set on the rear suspension.
anyone has any idea why it happens and what to do?
the ride is good on smooth tarmac, but when i hit a small bumps above 35mph, i can feel the car landed a bit side ways. i can feel that problem the most when the bump is on the left side.
already went back to the spring shop and also done wheel alignment, but they said nothing is wrong and the rear suspension is fixed.. so there is nothing to set on the rear suspension.
anyone has any idea why it happens and what to do?
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
