Changed ABS sensor but dashboard lights still on
#1
Newbie
Thread Starter
Join Date: Mar 2023
Location: Ft. Washington MD
Posts: 5
Likes: 0
Received 1 Like
on
1 Post
2015 GLA250 4matic
Changed ABS sensor but dashboard lights still on
Wife was driving and all of sudden the dashboard lit up like a Christmas tree and steering became a bit rough. Hooked to the scanner and got C0037 from scanner with a couple of other codes. So I ordered the part from Amazon and changed the rear ABS wheel sensor myself. All went well with installation but do I need to do anything special to get the lights on the dash to return to normal? Reset? I changed the part but various lights are still on ABS, 4matic unavailable, etc. Scanner will not reset the code, I also drove the car for a while after install, also did the left to right steering wheel turn as possible attempts to clear these lights. Please let me know what you think. Thanks a million folks!
#2
MBWorld Fanatic!
error codes do not mean part is bad could be other things whcih is why they give crete troubleshooting list of things to check in certain order.
Try google search - sometimes you get lucky
Try google search - sometimes you get lucky