Mark this thread as Unsold
(5) SSR GT-3 FULL MATTE BLACK 19x8.5 With TIRES
Thread Starter
MBWorld Fanatic!
Joined: May 2006
Posts: 1,369
Likes: 0
From: Nor Cal
06 c230 v6 SS
(5) SSR GT-3 FULL MATTE BLACK 19x8.5 With TIRES
I Just recently traded for (5) SSR GT-3 in Full Matte Black. These are 3 piece, and lightweight approx 23-4 lbs each.
I would rate these a 7.5-10
1 wheel has a slight bend that caused the powder coat to flake. (pictured)
There are minor chips in the powder coat around the lug holes as well, but not terrible.
There is a spare wheel that has a bend in the inner barrel, no tire on this wheel. can be fixed for $100 or less. The powder coat on this wheel is perfect 10/10
Tires are Nexen 235/35/19 approx 60% tread on 2, one has camber wear. the other is fine.
other 2 tires are almost brand new, no camber, about 80% tread.
These wheels look great, just need a little love. If you fix the bend on the spare and swap out the other with the bend, the set will look almost perfect.
Just dont have the time to mess with these, I need the money. Centers need to be bored for Mercedes. Fit perfectly fine on all AUDI's.
Thanks for looking, make offers that are reasonable, good price for (5) 3 piece lightweight forged wheels with tires!
Here are some pics, and I do not mind shipping as long as we can work out a reasonable cost.
Heres the wheel with the slight bend (no air leaks or vibrations)
Here is the bend close up...(no air leaks or vibration)
Tire tread on all tires are about 60-75% (2) tires only have 2k miles on them..
One tire with camber wear, still plenty of tread.
Just need a little love, or just cleaned up they still look great. Have all centering rings and center caps.
Also will throw in 12mm spacers if wanted to push out the rears. Ready to ship, need these gone!
Asking $800 for everything.
I would rate these a 7.5-10
1 wheel has a slight bend that caused the powder coat to flake. (pictured)
There are minor chips in the powder coat around the lug holes as well, but not terrible.
There is a spare wheel that has a bend in the inner barrel, no tire on this wheel. can be fixed for $100 or less. The powder coat on this wheel is perfect 10/10
Tires are Nexen 235/35/19 approx 60% tread on 2, one has camber wear. the other is fine.
other 2 tires are almost brand new, no camber, about 80% tread.
These wheels look great, just need a little love. If you fix the bend on the spare and swap out the other with the bend, the set will look almost perfect.
Just dont have the time to mess with these, I need the money. Centers need to be bored for Mercedes. Fit perfectly fine on all AUDI's.
Thanks for looking, make offers that are reasonable, good price for (5) 3 piece lightweight forged wheels with tires!
Here are some pics, and I do not mind shipping as long as we can work out a reasonable cost.
Heres the wheel with the slight bend (no air leaks or vibrations)
Here is the bend close up...(no air leaks or vibration)
Tire tread on all tires are about 60-75% (2) tires only have 2k miles on them..
One tire with camber wear, still plenty of tread.
Just need a little love, or just cleaned up they still look great. Have all centering rings and center caps.
Also will throw in 12mm spacers if wanted to push out the rears. Ready to ship, need these gone!
Asking $800 for everything.
Newbie
Joined: Apr 2010
Posts: 6
Likes: 0
2008 Audi S4 DTM
Hey, extremely interested in wheels and tires. Just a few questions:
1) Are these the authentic 3-piece SSR GT-3, meaning you know/are the original owner and know they are for a fact? A lot of the reps are decent?
2) Are these the 5x112, 19x8.5, ET37 version of the wheel?
3) Do you know the centerbore on these?
4) Any curb rash?
Let me know..
1) Are these the authentic 3-piece SSR GT-3, meaning you know/are the original owner and know they are for a fact? A lot of the reps are decent?
2) Are these the 5x112, 19x8.5, ET37 version of the wheel?
3) Do you know the centerbore on these?
4) Any curb rash?
Let me know..
Last edited by MattT516; Apr 16, 2010 at 11:33 AM.
