Mark this thread as Sold
FS: 20" Work Schwert SC1 Black Polish (BP) 9.0|10.0 with Yoko S-Drives
Thread Starter
Junior Member
Joined: Nov 2007
Posts: 55
Likes: 0
G35C
FS: 20" Work Schwert SC1 Black Polish (BP) 9.0|10.0 with Yoko S-Drives
WHEELS
Work Schwert SC1 Black Polish
(2) 20x9.0 +31 R-disk (BBK fitment)
(2) 20x10.0 +44 O-disk (low pad)
These are 5x114.3!
I know you guys are 5x112, so you'll need wheel adapters to make them fit.
Motorsport Tech makes high quality adapters for a reasonable price.
NO curb rash or bends! Just a few water marks on front lips.
TIRES
(2) 245/35/20 Yokohama S-Drive (65%, 80% flipped)
(2) 275/30/20 Yokohama S-Drive (60%, 75% flipped)
NO trades! NOT willing to part wheels/tires!
Located in SoCal, 91326.
Asking for $2800.
Shipping and PayPal extra.
FRONTS
REARS
Work Schwert SC1 Black Polish
(2) 20x9.0 +31 R-disk (BBK fitment)
(2) 20x10.0 +44 O-disk (low pad)
These are 5x114.3!
I know you guys are 5x112, so you'll need wheel adapters to make them fit.
Motorsport Tech makes high quality adapters for a reasonable price.
NO curb rash or bends! Just a few water marks on front lips.
TIRES
(2) 245/35/20 Yokohama S-Drive (65%, 80% flipped)
(2) 275/30/20 Yokohama S-Drive (60%, 75% flipped)
NO trades! NOT willing to part wheels/tires!
Located in SoCal, 91326.
Asking for $2800.
Shipping and PayPal extra.
FRONTS
REARS
Last edited by hxs; Apr 13, 2010 at 10:16 AM. Reason: bolt pattern
Former Vendor of MBWorld
Joined: Sep 2008
Posts: 975
Likes: 0
From: Bethlehem,PA
2005 E500 Estate Wagon
Actually, our cars are 5X112....and if the stud holes are wide enough, we can use wobble bolts (pcd variation studs) and these will bolt right up. What is the hub center bore?
