Mark this thread as Unsold
Brand New Forgestar F14 Titanium 20x9 and 20x10.5 - UPDATED
#1
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
SL600, CLS55, ML430
Brand New Forgestar F14 Titanium 20x9 and 20x10.5 - UPDATED
Hello,
I have a brand new set of Forgestar F14 Titanium wheels which I had originally purchased for an S550. These will fit the following:
2007-2011 Mercedes S350, S550, S63, S65
2007-2011 Mercedes CL550, CL63, CL65
I tried to return these; though, as these are custom made, I can not.
I am looking to get $1600 for these plus shipping. These go for much more than this.
THIS IS ALSO POSTED IN THE CLASSIFIEDS SECTION
Thanks,
Greg
I have a brand new set of Forgestar F14 Titanium wheels which I had originally purchased for an S550. These will fit the following:
2007-2011 Mercedes S350, S550, S63, S65
2007-2011 Mercedes CL550, CL63, CL65
I tried to return these; though, as these are custom made, I can not.
I am looking to get $1600 for these plus shipping. These go for much more than this.
THIS IS ALSO POSTED IN THE CLASSIFIEDS SECTION
Thanks,
Greg
Last edited by ghaun; 05-10-2011 at 01:24 PM. Reason: Added further model clarification.
#3
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
SL600, CLS55, ML430
I just called Forgestar to ask them. Here is what they told me:
S550
20x9 30
20x10.5 45
E63
20x9 40
20x10.5 49
So, I don't think that these would work.
S550
20x9 30
20x10.5 45
E63
20x9 40
20x10.5 49
So, I don't think that these would work.
Last edited by ghaun; 05-12-2011 at 12:31 AM. Reason: Mistake!
#6
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
SL600, CLS55, ML430
Here are the offsets:
20x9 +30
20x10.5 +45
Here is the concavity according to forgestar:
Fronts: Semi-concave
Rears: Deep Concave
I have not taken these out of the boxes yet. If you like, I can take them out for some pictures.
Otherwise, I will look for some pics showing concavity.
20x9 +30
20x10.5 +45
Here is the concavity according to forgestar:
Fronts: Semi-concave
Rears: Deep Concave
I have not taken these out of the boxes yet. If you like, I can take them out for some pictures.
Otherwise, I will look for some pics showing concavity.
Trending Topics
#11
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
SL600, CLS55, ML430
From all of the research that I can find, it looks like they will work quite well with the W211 chassis. You may wanta 3mm spacer or so on the rear depending on what tires you want. They will not work with the W212. Please do your own research.
Also, here are some pics. I only opened up a single front and rear box, but the other boxes are below inthe pics. You could tell that the boxes had not been opened before, given the stiffness of the fold.
Also, here are some pics. I only opened up a single front and rear box, but the other boxes are below inthe pics. You could tell that the boxes had not been opened before, given the stiffness of the fold.
#16
Member
Join Date: May 2010
Location: Washington St.
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Chevy Cavalier(206,000 miles)
Will these wheels fit a 2008 CLS63?
My stock wheels are 19's. Front offset 25mm Rear offset 28mm. 19x8.5, 19x9.5
My stock wheels are 19's. Front offset 25mm Rear offset 28mm. 19x8.5, 19x9.5
Last edited by val69; 05-25-2011 at 02:48 PM.
#17
Junior Member
Thread Starter
Join Date: Jun 2008
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
SL600, CLS55, ML430
val69,
Based, on the offsets that you provided, these should fit perfectly. In fact the front will have the same flushness (1mm). The rears should be within 4mm of being the same. If you want the wheels to extend past your factory wheels, then you could always use a 5mm spacer. Right now they are a perfect fit, given your current wheels.
Thanks,
Greg
Based, on the offsets that you provided, these should fit perfectly. In fact the front will have the same flushness (1mm). The rears should be within 4mm of being the same. If you want the wheels to extend past your factory wheels, then you could always use a 5mm spacer. Right now they are a perfect fit, given your current wheels.
Thanks,
Greg