Mark this thread as Unsold
19" AMG style wheels $699 *NEW* from PowerWheels Pro
#551
Former Vendor of MBWorld
Thread Starter
Hi ZorroAMG
I was preparing to list all the 20" options for you until I remembered your car has an unique fitment 5x130 offset, similar to Cayenne but with a different center bore.
We do have this option for your car in 20x9 in gun machined face for $749 plus $85 shipping:
beaglePod,
Thank you, I will get some prices for you tomorrow on either set.
The 823s are $699 and the multispokes $799, not sure if that will tip the scales over either of the options. They are both beautiful looking wheels, very different from each other, it depends on what vision you have for your car.
Richard2011
I checked again and you are right on. The Black Series have 10 spokes and the C63s have 16, which is like the ones we have, 16.
When I was checking I was looking at the spoke surface curvature and machining not counting the spokes.
At any rate, they are both beautiful designs.
Regarding offsets, we work with a machine shop that specializes in wheels and they can take off 3-4mm off the offset by machining the bore. That is the most they can do safely without EVER having any issues. They always check to make sure there is enough thickness on the wheel bore before they do anything like that. Their work has always been spotless, and their record immaculate.
That should address fitment issues, depending on how much you plan on lowering your sled.
floresrefugio,
Thank you in advance for the call.
The 2014 E63 I can see comes with the 828 style wheels or the multispoke 856 that we had in stock (out of them at this point in time).
We do have the 823s that are pretty close I believe are pretty close to those 5 split spoke. They are in stock staggered and in 45mm offset which I think is correct for the 2014 E63.
Thank you,
I was preparing to list all the 20" options for you until I remembered your car has an unique fitment 5x130 offset, similar to Cayenne but with a different center bore.
We do have this option for your car in 20x9 in gun machined face for $749 plus $85 shipping:
beaglePod,
Thank you, I will get some prices for you tomorrow on either set.
The 823s are $699 and the multispokes $799, not sure if that will tip the scales over either of the options. They are both beautiful looking wheels, very different from each other, it depends on what vision you have for your car.
Richard2011
I checked again and you are right on. The Black Series have 10 spokes and the C63s have 16, which is like the ones we have, 16.
When I was checking I was looking at the spoke surface curvature and machining not counting the spokes.
At any rate, they are both beautiful designs.
Regarding offsets, we work with a machine shop that specializes in wheels and they can take off 3-4mm off the offset by machining the bore. That is the most they can do safely without EVER having any issues. They always check to make sure there is enough thickness on the wheel bore before they do anything like that. Their work has always been spotless, and their record immaculate.
That should address fitment issues, depending on how much you plan on lowering your sled.
floresrefugio,
Thank you in advance for the call.
The 2014 E63 I can see comes with the 828 style wheels or the multispoke 856 that we had in stock (out of them at this point in time).
We do have the 823s that are pretty close I believe are pretty close to those 5 split spoke. They are in stock staggered and in 45mm offset which I think is correct for the 2014 E63.
Thank you,
#552
What do you currently have in stock for a 2006 W211 E500 in 18 inch sizes staggered and non staggered? I just had Deborah credit me today for my order for the 18x8.5 style 823's in gun metal due to being out of stock.
Any idea if those will be back in stock anytime soon?
Also, do you have any pics of the 818's on a W211? Tried searching unsuccessfully.
Thanks!
Any idea if those will be back in stock anytime soon?
Also, do you have any pics of the 818's on a W211? Tried searching unsuccessfully.
Thanks!
#554
Former Vendor of MBWorld
Thread Starter
Hi digitalfuzion,
Thank you for interest and apologies for the 823s, I am afraid we have run out of those.
We do have these that would work on your car in 18" non staggered:
505 LM style $529
505 LM Style $529
810 18x8 $499
859 18x8.5 $529
811 18x8.5 $529
831 18x8.5 $529
818 18x8.5 $569
Thank you for interest and apologies for the 823s, I am afraid we have run out of those.
We do have these that would work on your car in 18" non staggered:
505 LM style $529
505 LM Style $529
810 18x8 $499
859 18x8.5 $529
811 18x8.5 $529
831 18x8.5 $529
818 18x8.5 $569
#556
Just tried sending you a PM, your inbox is full. I tried calling you earlier in the car and/or at a bad time, can you please call me back 916.730.0948.
Thank you,
Thank you,
Hi digitalfuzion,
Thank you for interest and apologies for the 823s, I am afraid we have run out of those.
We do have these that would work on your car in 18" non staggered:
505 LM style $529
505 LM Style $529
810 18x8 $499
859 18x8.5 $529
811 18x8.5 $529
831 18x8.5 $529
818 18x8.5 $569
Thank you for interest and apologies for the 823s, I am afraid we have run out of those.
We do have these that would work on your car in 18" non staggered:
505 LM style $529
505 LM Style $529
810 18x8 $499
859 18x8.5 $529
811 18x8.5 $529
831 18x8.5 $529
818 18x8.5 $569
#558
Thanks, Michael
#559
Member
Join Date: May 2012
Location: Laporte, Indiana
Posts: 115
Likes: 0
Received 2 Likes
on
2 Posts
2006 SL55 AMG
What wheels do you have that will fit a W211 2009 E350 4matic ? 19's or 20's preferably
I like the 811 and 818 on your website. Can you do staggered with the 4 matic or is that even available ?
Also, PM me a price wheels and tires as a combo.
I like the 811 and 818 on your website. Can you do staggered with the 4 matic or is that even available ?
Also, PM me a price wheels and tires as a combo.
Last edited by Benz Mike; 10-23-2013 at 08:26 PM.
#562
Former Vendor of MBWorld
Thread Starter
Hi vendsit, Fixed the inbox, the sensors are $55 a piece and the wheels are $569 for non staggered. Shipping is $85.
You can call us at 248 686 2035 or we can send u a paypal invoice for them.
Hi Richard2011, Unfortunately this is only in stock in 35mm due to factory unavailability in 45mm
It doesn't have the AMG logo on there and it is a beautiful wheel. If nothing else works with them to run it in 45mm I will try begging
Hi Amin Skaf
We do have those 2 tone 823 in stock in 19" staggered or not and the 818 not staggered.
They will work with your stock bolts and they will ship with the mercedes center caps and they are TPMS compatible.
Thank you,
You can call us at 248 686 2035 or we can send u a paypal invoice for them.
Hi Richard2011, Unfortunately this is only in stock in 35mm due to factory unavailability in 45mm
It doesn't have the AMG logo on there and it is a beautiful wheel. If nothing else works with them to run it in 45mm I will try begging
Hi Amin Skaf
We do have those 2 tone 823 in stock in 19" staggered or not and the 818 not staggered.
They will work with your stock bolts and they will ship with the mercedes center caps and they are TPMS compatible.
Thank you,
#563
Hi vendsit, Fixed the inbox, the sensors are $55 a piece and the wheels are $569 for non staggered. Shipping is $85.
You can call us at 248 686 2035 or we can send u a paypal invoice for them.
Hi Richard2011, Unfortunately this is only in stock in 35mm due to factory unavailability in 45mm
It doesn't have the AMG logo on there and it is a beautiful wheel. If nothing else works with them to run it in 45mm I will try begging
Hi Amin Skaf
We do have those 2 tone 823 in stock in 19" staggered or not and the 818 not staggered.
They will work with your stock bolts and they will ship with the mercedes center caps and they are TPMS compatible.
Thank you,
You can call us at 248 686 2035 or we can send u a paypal invoice for them.
Hi Richard2011, Unfortunately this is only in stock in 35mm due to factory unavailability in 45mm
It doesn't have the AMG logo on there and it is a beautiful wheel. If nothing else works with them to run it in 45mm I will try begging
Hi Amin Skaf
We do have those 2 tone 823 in stock in 19" staggered or not and the 818 not staggered.
They will work with your stock bolts and they will ship with the mercedes center caps and they are TPMS compatible.
Thank you,
#565
Hi Vassili,
I'm a little confused. You have 831 listed to look like this http://i735.photobucket.com/albums/w...ps69e66f27.jpg
On your website, 831 looks nothing like that. 832 looks like it only on the first picture, but the rest look nothing like that. I am VERY interested in the wheel in the picture. Do you make that wheel in a staggered 19 inch set for a c250 coupe? Please let me know.
I'm a little confused. You have 831 listed to look like this http://i735.photobucket.com/albums/w...ps69e66f27.jpg
On your website, 831 looks nothing like that. 832 looks like it only on the first picture, but the rest look nothing like that. I am VERY interested in the wheel in the picture. Do you make that wheel in a staggered 19 inch set for a c250 coupe? Please let me know.
#567
Former Vendor of MBWorld
Thread Starter
Vendisit Sorry if we missed your call. Please pm me your # I will call you
Here is a pic as you requested:
Cjackermann
The CLS takes a low offset in the high 20s.
The 815s we have in stock are confirmed to fit in 20x8.5/9.5 35mm:
What sizes did you have in mind?
Amin, Sorry you are right, the 831 is the big 20" wheel. This is the 832. We will correct it.
We do have them in stock in 18x8.5 35mm at this point in time. I wish we could bring it in 19" staggered but the factory is running at capacity and there is no stock of this wheel in those specs.
One option to make them work on your car in the existing spec is to shave off 4mm from the offset from the back of the wheel to make it 39mm and tuck it in a little more to keep it within the fenderline. That is an extra $50 which is our cost.
Thank you
Here is a pic as you requested:
Cjackermann
The CLS takes a low offset in the high 20s.
The 815s we have in stock are confirmed to fit in 20x8.5/9.5 35mm:
What sizes did you have in mind?
Amin, Sorry you are right, the 831 is the big 20" wheel. This is the 832. We will correct it.
We do have them in stock in 18x8.5 35mm at this point in time. I wish we could bring it in 19" staggered but the factory is running at capacity and there is no stock of this wheel in those specs.
One option to make them work on your car in the existing spec is to shave off 4mm from the offset from the back of the wheel to make it 39mm and tuck it in a little more to keep it within the fenderline. That is an extra $50 which is our cost.
Thank you
#570
MBWorld Fanatic!
Hi Amin,
Unfortunately those are in stock only in 18x8.5. The finish is gunmetal with machined face.
Here are a couple of close up pics
[IMG]http://i735.photobucket.com/albums/ww357/vpapadop/P4284304_zps636be1ea.jpg[IMG]
[IMG]http://i735.photobucket.com/albums/ww357/vpapadop/P4284305_zps71426687.jpg[IMG]
Thank you
Unfortunately those are in stock only in 18x8.5. The finish is gunmetal with machined face.
Here are a couple of close up pics
[IMG]http://i735.photobucket.com/albums/ww357/vpapadop/P4284304_zps636be1ea.jpg[IMG]
[IMG]http://i735.photobucket.com/albums/ww357/vpapadop/P4284305_zps71426687.jpg[IMG]
Thank you
#572
Former Vendor of MBWorld
Thread Starter
Cjackermann,
We currently only have the 815 in stock in staggered 20".
In 20x9 43mm we have the following. You could stagger the tires on them if you wanted: The high offset would require you to use spacers to push them out a bit.
Thanks
We currently only have the 815 in stock in staggered 20".
In 20x9 43mm we have the following. You could stagger the tires on them if you wanted: The high offset would require you to use spacers to push them out a bit.
Thanks
#573
Senior Member
#574
Former Vendor of MBWorld
Thread Starter
Hi maxusa,
These are the 814s in Hyper Silver in 18x9.5 35mm all around. We do have these with the AMG engraving on the spoke in gun machined face.
I have to check if we have these in Hyper Silver but I think we might be out. If you wanted the 18x9.5 all around it is $599 for the set and shipping is $85
Thanks
These are the 814s in Hyper Silver in 18x9.5 35mm all around. We do have these with the AMG engraving on the spoke in gun machined face.
I have to check if we have these in Hyper Silver but I think we might be out. If you wanted the 18x9.5 all around it is $599 for the set and shipping is $85
Thanks
#575
Senior Member
Please check 814s in Hyper Silver 18X9.5 35mm all around. I am interested. Are these in the photos machined face or not? It's hard to tell from the photos. Thanks.