Mark this thread as Unsold
Feeler: Carlsson 3/6 18x8.5 & 18x10
07-29-2012, 04:22 PM
#37
Junior Member
Join Date: Jul 2010
Location: Hayward, ca
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
2013 W204
Damn. Woukd love these On my 202. Im running the same right now 18x8.5 and 18x10 but my ets are 45 with 20mm spacers all around. Whats the absolute lowest ull take shipped to ca 94568
07-29-2012, 04:52 PM
#38
18x8.5 ET25
18x10 ET25
My wheels would poke 12mm in the front and poke 16mm in the rear from your current setup.
I'm firm on the price. These wheels are in great shape.
07-30-2012, 12:09 AM
#39
Senior Member
Join Date: Oct 2005
Location: HOUSTON, TX
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
'06 CLS55 P030
08-09-2012, 01:21 AM
#46
It can definitely be done.
The most aggressive on a W203 I've seen is 18x10 with a +15, that said, the C55's have a tad bit (7 mm is the number that pops in my head for some reason) wider fenders. So, if you take a look at phister's thread, and do the fender pulling and rolling he did, these can be run. Fronts should be no problem, just slap a 215 on there. Rears will be trickier, but again definitely doable.
The most aggressive on a W203 I've seen is 18x10 with a +15, that said, the C55's have a tad bit (7 mm is the number that pops in my head for some reason) wider fenders. So, if you take a look at phister's thread, and do the fender pulling and rolling he did, these can be run. Fronts should be no problem, just slap a 215 on there. Rears will be trickier, but again definitely doable.
