Mark this thread as Unsold
FS: 19" Forgestar F14 Wheels (Matte Black)
#1
Senior Member
Thread Starter
Join Date: Oct 2008
Location: Las Vegas, NV
Posts: 280
Likes: 0
Received 1 Like
on
1 Post
C300 4MATIC (w204)
FS: 19" Forgestar F14 Wheels (Matte Black)
SOLD!!!
I'm selling my car so I took off my forgestar f14's and decided to sell them separate. Here are the specs and condition:
Front: 19" x 8.5"
Lug: 5x112
Offset: 45mm
Center Bore: 66.6mm
Recommended Tire Size: 245-35-19 (Tires Not Included)
Rear: 19" x 9"
Lug: 5x112
Offselt: 47mm
Center Bore: 66.6mm
Recommended Tire Size: 265-30-19 (Tires Not Included)
I should first note that Forgestar used to Paint their wheels Flat Black. I had Forgestar custom PowderCoat these instead of getting the normal painted ones. It was an extra $250 for the entire set. Many people complained about the Painted ones because the paint was chipping. So if you see anyone else selling matte black forgestars make sure you ask if they are painted or powdercoated.
Condition of all wheels: 1 Front & 1 Rear are in perfect condition. 1 Front has a slight 1in flat spot on the lip due to a pothole but can be easily smoothed out at a wheel shop for about $50 but not necessary. 1 Rear is curb rashed and needs to be touched up or re-powdercoated. Its about $75 to re-powdercoat but not necessary. All wheels hold air in the tires and balance. The wheels don't need to be fixed if you don't care.
Asking $1050 plus shipping. SOLD!!!
This ones in Perfect Condition
This ones in Perfect Condition
This is the one that hit the pot hole and has a small flat spot. You can't see it in the photo and barely noticeable in person. Its on top right where the garage floor seem is.
This ones the one that's curb rashed.
SOLD!!!
I'm selling my car so I took off my forgestar f14's and decided to sell them separate. Here are the specs and condition:
Front: 19" x 8.5"
Lug: 5x112
Offset: 45mm
Center Bore: 66.6mm
Recommended Tire Size: 245-35-19 (Tires Not Included)
Rear: 19" x 9"
Lug: 5x112
Offselt: 47mm
Center Bore: 66.6mm
Recommended Tire Size: 265-30-19 (Tires Not Included)
I should first note that Forgestar used to Paint their wheels Flat Black. I had Forgestar custom PowderCoat these instead of getting the normal painted ones. It was an extra $250 for the entire set. Many people complained about the Painted ones because the paint was chipping. So if you see anyone else selling matte black forgestars make sure you ask if they are painted or powdercoated.
Condition of all wheels: 1 Front & 1 Rear are in perfect condition. 1 Front has a slight 1in flat spot on the lip due to a pothole but can be easily smoothed out at a wheel shop for about $50 but not necessary. 1 Rear is curb rashed and needs to be touched up or re-powdercoated. Its about $75 to re-powdercoat but not necessary. All wheels hold air in the tires and balance. The wheels don't need to be fixed if you don't care.
Asking $1050 plus shipping. SOLD!!!
This ones in Perfect Condition
This ones in Perfect Condition
This is the one that hit the pot hole and has a small flat spot. You can't see it in the photo and barely noticeable in person. Its on top right where the garage floor seem is.
This ones the one that's curb rashed.
SOLD!!!
Last edited by TheDarkSide; 06-06-2012 at 05:37 PM.
#3
Senior Member
Thread Starter
Join Date: Oct 2008
Location: Las Vegas, NV
Posts: 280
Likes: 0
Received 1 Like
on
1 Post
C300 4MATIC (w204)
I believe all Mercedes are 5x112 pattern with 66.6 center bore so they would fit. As far as being flush, I would need to know your stock width/offsets. The good thing is that the W204 C-Class runs a higher offset than almost all other models do so all you would need is a spacer if they turn out not flush