MBWorld.org Forums
More jb weld fixes on the ashtray assembly. This will likely needed sanded and painted black to look OK. But luckily the ashtray area will be properly secured. To retain the screw hole, fill with jb weld then immediately after, before drying, screw in one of your screws. About 20 hours later you can unscrew the screw you left in place, and now you have a brand new fitting for you ashtray screws
More jb weld fixes on the ashtray assembly. This will likely needed sanded and painted black to look OK. But luckily the ashtray area will be properly secured. To retain the screw hole, fill with jb weld then immediately after, before drying, screw in one of your screws. About 20 hours later you can unscrew the screw you left in place, and now you have a brand new fitting for you ashtray screws
0 2019/08/10 20:29:54
Nik at euroworks was kinda enough to let me sort through his small dumpster full of recycled Mercedes wiring. After about 15 minutes of digging I found this harness and luckily it’s the exact one I needed! If you do this swap, make sure to get the one harness you need from your seller. If Nik didn’t have a collection of Mercedes wires and harnesses I may have had to open this upper control module and hardwire everything!!
Nik at euroworks was kinda enough to let me sort through his small dumpster full of recycled Mercedes wiring. After about 15 minutes of digging I found this harness and luckily it’s the exact one I needed! If you do this swap, make sure to get the one harness you need from your seller. If Nik didn’t have a collection of Mercedes wires and harnesses I may have had to open this upper control module and hardwire everything!!
0 2019/08/10 20:30:01
On t
On t
0 2019/08/10 20:30:07
0 2019/08/10 20:30:13
0 2019/08/10 20:30:20
0 2019/08/10 20:30:28
0 2019/08/10 20:30:34
All done and out for a drive. Fm/am radio works. Upper control panel works( you just have to restart the car to turn esp back on after turning it off), cigarette lighter works. Built in navigation does not work. Now to decide whether to 3d print some cup holders or buy some oem versions
All done and out for a drive. Fm/am radio works. Upper control panel works( you just have to restart the car to turn esp back on after turning it off), cigarette lighter works. Built in navigation does not work. Now to decide whether to 3d print some cup holders or buy some oem versions
0 2019/08/11 16:01:12
0 2019/08/20 19:38:26
0 2019/09/08 11:20:15
0 2019/09/08 11:27:32
Very quick and unflattering photo to show the front lip for you all
Very quick and unflattering photo to show the front lip for you all
0 2019/09/20 20:25:15
0 2019/09/21 16:55:39
0 2019/09/21 16:55:44
0 2019/09/21 16:55:51
0 2019/09/21 18:53:16
0 2019/09/21 18:53:21
0 2019/09/21 20:51:46
0 2019/09/21 20:51:50
215/220 front rotors, amg
215/220 front rotors, amg
0 2019/09/23 15:55:43
My current rotors , non amg front rotors for 215/220 early years (not sure about later years)
My current rotors , non amg front rotors for 215/220 early years (not sure about later years)
0 2019/09/23 15:55:48
This is the w216/221 amg front rotor
This is the w216/221 amg front rotor
0 2019/09/23 15:55:52
Fitment with 20” wheels, I’m not even sure 19” wheels would work with these massive calipers
Fitment with 20” wheels, I’m not even sure 19” wheels would work with these massive calipers
0 2019/09/23 15:55:57
Just the caliper on my 2002 cl500 front spindle
Just the caliper on my 2002 cl500 front spindle
0 2019/09/23 15:56:02
0 2019/10/11 11:42:33
W216/221 rotor that’s needed
W216/221 rotor that’s needed
0 2019/10/20 00:49:23
Mounting ears need drilled out slightly to accommodate the larger caliper bolts from the 216/221 brakes
Mounting ears need drilled out slightly to accommodate the larger caliper bolts from the 216/221 brakes
0 2019/10/20 00:49:26
Yellow to match the valve covers
Yellow to match the valve covers
0 2019/10/20 00:49:31
Valve covers to match the calipers
Valve covers to match the calipers
0 2019/10/20 00:49:35
Caliper figment against 20” wheel. Maybe certain 19” wheels would fit but I’m not sure. I also had to trim my dust shield very slightly for proper fitment
Caliper figment against 20” wheel. Maybe certain 19” wheels would fit but I’m not sure. I also had to trim my dust shield very slightly for proper fitment
0 2019/10/20 00:49:39
0 2019/10/20 00:54:03
0 2019/10/20 00:54:07
0 2019/11/30 13:31:39
0 2019/11/30 20:23:04
0 2019/11/30 23:25:03
0 2019/11/30 23:25:10
0 2019/11/30 23:25:17
0 2019/11/30 23:25:23
0 2019/12/01 12:31:13
0 2019/12/01 12:31:21