MBWorld.org Forums
3D printed replacement piece to be bonded to panel. Production part will be black nylon printing on an industrial powder bed printer.
3D printed replacement piece to be bonded to panel. Production part will be black nylon printing on an industrial powder bed printer.
0 2020/11/17 12:42:09
0 2020/11/17 12:42:43
Old hinge points are cut here to make room for the replacement piece.
Old hinge points are cut here to make room for the replacement piece.
0 2020/11/17 12:49:10
A good piece shown with the clip that fits in the door slot, shown with foam removed.
A good piece shown with the clip that fits in the door slot, shown with foam removed.
0 2020/11/20 11:21:21
Broken tab
Broken tab
0 2020/11/20 11:23:21
3D printed repair piece installed
3D printed repair piece installed
0 2020/11/20 11:24:15
Complete repair with foam reinstalled
Complete repair with foam reinstalled
0 2020/11/20 11:25:59
0 2021/01/10 06:40:14
0 2021/03/16 07:34:02
0 2021/04/21 08:13:20
0 2021/07/19 17:25:27
Before
Before
0 2021/12/08 16:22:47
After
After
0 2021/12/08 16:24:08
0 2022/01/21 13:49:22
Inside view with roof closed, showing spring
Inside view with roof closed, showing spring
0 2023/01/02 07:26:50
Hook, shown from inside
Hook, shown from inside
0 2023/01/02 07:27:03
Cam, shown from outside
Cam, shown from outside
0 2023/01/02 07:27:15
0 2023/02/06 07:49:03
0 2023/05/02 10:02:17
0 2023/05/02 10:03:53
0 2023/08/14 12:56:33
0 2023/08/25 17:35:12
Do you have a scanner screen like this? If so, try lowering the rear window on the relevant side and see if the relay is actuated.
Do you have a scanner screen like this? If so, try lowering the rear window on the relevant side and see if the relay is actuated.
0 2023/08/25 17:36:49
0 2025/03/09 14:19:06
0 2025/03/12 15:49:45
0 2025/03/12 15:51:03
0 2025/07/31 07:52:24
Top of tank is to the left.
Top of tank is to the left.
0 2025/07/31 08:44:37
0 2025/07/31 08:44:41
0 2025/07/31 08:44:45