MBWorld.org Forums
Day 1
Day 1
0 2022/09/23 15:00:09
Day 4... Figuring out what I have to work with and my free space.
Day 4... Figuring out what I have to work with and my free space.
0 2022/09/23 15:01:02
Always tearing my brand new cars apart. Before the Dynamat.
Always tearing my brand new cars apart. Before the Dynamat.
0 2022/09/23 15:02:02
0 2022/09/23 15:02:24
Realizing that I don't have the MB optical and they returned to the coaxial system. I have the MBUX with the entry Burmester system. Was originally going to go with the MoBridge interface and DSP. I thought I could intercept the signal before amplification and convert to Toslink while keeping the factory amp and speakers while providing the optical out to my JL VXi 1000/1 amp that would power a JL Audio 12W 7. Spoke with Frazer at MoBridge who is the head tech guy.
Realizing that I don't have the MB optical and they returned to the coaxial system. I have the MBUX with the entry Burmester system. Was originally going to go with the MoBridge interface and DSP. I thought I could intercept the signal before amplification and convert to Toslink while keeping the factory amp and speakers while providing the optical out to my JL VXi 1000/1 amp that would power a JL Audio 12W 7. Spoke with Frazer at MoBridge who is the head tech guy.
0 2022/09/23 15:03:13
MoBridge is a all or nothing affair. Which I am not at the point of going just yet My car is mine and paid off. 8 years full warranty. I plan on keeping it for atleast that long. I have a JL Audio HD 600/4 amp and would need to add another just to power in the factory speakers. Then I also have a JL HD 1200/1. That would mean I would be running three amplifiers in total. They are extremely efficient for the output.
MoBridge is a all or nothing affair. Which I am not at the point of going just yet My car is mine and paid off. 8 years full warranty. I plan on keeping it for atleast that long. I have a JL Audio HD 600/4 amp and would need to add another just to power in the factory speakers. Then I also have a JL HD 1200/1. That would mean I would be running three amplifiers in total. They are extremely efficient for the output.
0 2022/09/23 15:03:59
Started adding my usual sound treatment through out the entire trunk. Matting in multiple layers. And liquid at all the seams and hard to mat areas. I use liquid second skin under all plastics as well as matting doesn't work well ever for installing there usually.
Started adding my usual sound treatment through out the entire trunk. Matting in multiple layers. And liquid at all the seams and hard to mat areas. I use liquid second skin under all plastics as well as matting doesn't work well ever for installing there usually.
0 2022/09/23 15:04:14
For now I believe I will be using either the JL LOC 22 and grabbing the signal for the factory subs. Not what I like to do at all as that signal is processed and EQd already. Makes for less then ideal output it's been quite some time since I've gone this route. I've been looking at the Epicenter from Audio Control. Not sold as I understand at what is does and how. I really would prefer to grab and splice into the Coaxial signal and get a full bandwidth signal and use the JL VXi onboard processor
For now I believe I will be using either the JL LOC 22 and grabbing the signal for the factory subs. Not what I like to do at all as that signal is processed and EQd already. Makes for less then ideal output it's been quite some time since I've gone this route. I've been looking at the Epicenter from Audio Control. Not sold as I understand at what is does and how. I really would prefer to grab and splice into the Coaxial signal and get a full bandwidth signal and use the JL VXi onboard processor
0 2022/09/23 15:04:32
My neighbors think I am insane all the time . I just tore my Escalade apart completely. Dash and all. That thing kicked my ass royally. Just the shear volume. Lots of Dynamat....
My neighbors think I am insane all the time . I just tore my Escalade apart completely. Dash and all. That thing kicked my ass royally. Just the shear volume. Lots of Dynamat....
0 2022/09/23 15:04:47
Do I use this?? Or go with the HD for now.. I am undecided still. I really want to go optical into here but haven't found a proper Converter/Interface that aligns with my vision.
Do I use this?? Or go with the HD for now.. I am undecided still. I really want to go optical into here but haven't found a proper Converter/Interface that aligns with my vision.
0 2022/09/23 15:04:59
I use welding leads from a local manufacturer and have for years now. Temco. I use a 20 ton crimper. Solder the ends as MB does. For the factory stuff I crimp ferrules as opposed to just bare wire into terminals. 0 gauge for power and grounds. I ground to the chassis always.
I use welding leads from a local manufacturer and have for years now. Temco. I use a 20 ton crimper. Solder the ends as MB does. For the factory stuff I crimp ferrules as opposed to just bare wire into terminals. 0 gauge for power and grounds. I ground to the chassis always.
0 2022/09/23 15:05:09
Stopped using fuses long again. Spark proof breakers are priceless.
Stopped using fuses long again. Spark proof breakers are priceless.
0 2022/09/23 15:05:21
Trunk is looking good!
Trunk is looking good!
0 2022/09/23 15:05:33
I ordered this after tons of measurements. Tried to get into trunk a couple times. Not yet successful. I'll get it. Even if I have to start cutting metal. I am pretty close and still have a few things I can remove that should give me just enough room to get it in.
I ordered this after tons of measurements. Tried to get into trunk a couple times. Not yet successful. I'll get it. Even if I have to start cutting metal. I am pretty close and still have a few things I can remove that should give me just enough room to get it in.
0 2022/09/23 15:05:38
Not 100% buttoned up yet as I may do this a little different still.
Not 100% buttoned up yet as I may do this a little different still.
0 2022/12/04 11:26:26
About as factory looking as one can get. My rca pre outs from the Burmester.these are auxiliary full signal channels.
About as factory looking as one can get. My rca pre outs from the Burmester.these are auxiliary full signal channels.
0 2022/12/04 11:26:33
0 2022/12/04 11:26:39
The entire trunk area I used liquid sound treatment on all the areas panels join. Then I installed 2-3 layers of actual mat.I sprayed the liquid to all the insides of the panel pieces and applied mat to the major flat areas.
The entire trunk area I used liquid sound treatment on all the areas panels join. Then I installed 2-3 layers of actual mat.I sprayed the liquid to all the insides of the panel pieces and applied mat to the major flat areas.
0 2022/12/04 11:26:48
Stock caps.
Stock caps.
0 2022/12/04 11:26:56
Super cheapies replaced my factory AMG Caps. Ceramic treated and installed
Super cheapies replaced my factory AMG Caps. Ceramic treated and installed
0 2022/12/04 11:27:02
Black Center Caps
Black Center Caps
0 2022/12/04 11:27:09
Stock caps removed
Stock caps removed
0 2023/04/09 00:31:43
0 2023/06/16 09:33:21
A little Graphen foam cannon action weekly.
A little Graphen foam cannon action weekly.
0 2023/06/16 09:33:31
Color sanded and added Adam’s Advanced Graphene coating. Two of them actually. On everything. Rims, calipers. Plastics. And paint
Color sanded and added Adam’s Advanced Graphene coating. Two of them actually. On everything. Rims, calipers. Plastics. And paint
0 2023/06/16 09:33:43
0 2023/06/16 09:33:51
Running the canyon everyday.
Running the canyon everyday.
0 2023/06/16 09:34:02
Canyon life
Canyon life
0 2023/06/16 09:34:13
My back yard.
My back yard.
0 2023/06/16 09:34:23
Badgless
Badgless
0 2023/06/16 09:34:31
0 2023/06/16 09:40:23
Stock center caps
Stock center caps
0 2023/06/16 09:40:39
Blacked out caps.
Blacked out caps.
0 2023/06/16 09:40:46
A little wet sanding and then Graphene.
A little wet sanding and then Graphene.
0 2023/06/16 09:40:55
0 2023/06/16 09:41:04
Measured three times before ordering and still was a major mission to install. But I got it done. JL Audio 12W7
Measured three times before ordering and still was a major mission to install. But I got it done. JL Audio 12W7
0 2023/06/16 09:43:42
JL Audio VXi monoblock amp 900/1
JL Audio VXi monoblock amp 900/1
0 2023/06/16 09:58:36
Shaving. Shaved everything except the star. That got scuffed then painted black.
Shaving. Shaved everything except the star. That got scuffed then painted black.
0 2023/06/16 09:58:51
Audioquest wiring always or self made.
Audioquest wiring always or self made.
0 2023/06/16 09:59:01
12W7
12W7
0 2023/06/16 09:59:09