Log In
Register
Forums
Getting Started
Site Announcements
New Members Check In!
MBWorld Featured Car of the Month Contest
Mercedes-Benz Electric Vehicles
EQA
EQB (X243) SUV
EQC electric SUV
EQE (V295) Sedan
EQS
Mercedes-Benz AMG Vehicles
AMG Vendor Classifieds
A45, A35 AMG (W176, W177)
CLA 45 AMG (C118)
CLA 35 AMG (C118)
CLA 45 AMG (C117)
C63 AMG (W206)
C63s, C63 and C43 AMG (W205)
C63 AMG (W204)
C32 AMG, C55 AMG (W203)
C36 AMG, C43 AMG (W202)
CLK55 AMG, CLK63 AMG (W208, W209)
E55, E63, E53, E43 AMGs (W210, W211, W212, W213)
CLS63, CLS55, CLS53 AMG (C219, C218, C257)
S63 AMG, S63 AMG 4Matic, S65 AMG (W222, V222)
S63 AMG 4MATIC Coupe, S65 AMG Coupe (C217), Convert. (A217)
S55 AMG, S65 AMG , S63 AMG (W220, W221)
CL55 AMG, CL65 AMG, CL63 AMG (C215, C216)
SL55 AMG, SL63 AMG, SL65 AMG (R230)
SLS AMG Gullwing (C197, R197)
AMG GT: GT, GTS, GTC, GTR, GT-4door (C190 / R190)
SLK55 (R172)
SLK55 (R171)
SLK32 AMG (R170)
GLA45, GLA35 AMG (X156, H247)
GLC63s, GLC63, GLC43 AMG SUV and Coupe (X253, C253)
GLE63s, GLE63, GLE53 AMG SUV & Coupe (W166, W167)
GL63 AMG and GLS63 (X166, X167)
ML63 AMG (W166)
ML55 AMG, ML63 AMG (W163, W164)
G55 AMG (W463)
G63 AMG (W464)
R63 AMG (W251)
Mercedes-Benz Sedans
MB Sedan Vendor Classifieds
S-Class (W223)
S-Class (W222)
S-Class (W221)
S-Class (W220)
S-Class (W140)
S-Class (W126)
S-Class (W116)
E-Class (W214)
E-Class (W213)
E-Class (W212)
E-Class (W211)
E-Class (W210)
E-Class (W124)
E-Class (W123)
E-Class (W114/W115)
C-Class (W206)
C Class (W205)
C-Class (W204)
C-Class (W203)
C-Class (W202)
190E (W201)
B-Class (W245, W246)
A-class (W168, W169,W176,W177)
Mercedes-Benz Coupes & Cabriolets
MB Coupes & Cabriolets Vendor Classifieds
S/CL-Class (W140) Coupe
CL-Class (W215)
CL-Class (W216)
S-Class (C217) Coupe & (A217) Cabrio
CLS Coupe (C218)
CLS Coupe (C219)
CLS Coupe (C257)
C-Class Coupe (C204)
C-Class Coupe (C205)
CLK-Class (W209)
CLK-Class (W208)
E-Class Coupe (C207) & Cabrio (A207)
E-Class Coupe (C238) & Cabrio (A238)
CLA Coupe (C117)
CLA Coupe (C118)
CLE Class Coupe (C236) & Cabrio (A236)
Mercedes-Benz SLR & SL Roadsters
MB SLR & SL Roadsters Vendor Classifieds
SLR McLaren (C199)
SL-Class (R232)
SL-Class (R231)
SL-Class (R230)
SL-Class (R129)
SL/SLC-Class (R107)
SLK-Class (R172)
SLK-Class (R171)
SLK-Class (R170)
Mercedes-Benz SUVs, Trucks, Vans, Diesels, Other
MB SUVs, Trucks, Vans, Diesels Vendor Classfieds
G Class (W463A)
G Class (W460, W461, W463)
GL Class (X166)
GL Class (X164)
GLC Class (X254)
GLC Class (X253)
GLK-Class (X204)
M-Class (W166)
M-Class (W164)
M-Class (W163)
GLA Class (H247)
GLA Class (X156)
GLB Class (X247)
GLE Class (V167)
GLE Class (W166)
GLS Class (X167)
GLS Class (X166)
R-Class (W251)
Smart Car
Maybach (W240)
V-Class
Diesel Forum
X-Class
Classic, Vintage Mercedes-Benz Vehicles, Other Cars
Classic, Vintage MB Vehicles Vendor Classifieds
Vintage Mercedes-Benz Owner Registry
General Discussion of Mercedes-Benz Classics
Classic Mercedes DIY tips and hints
Other Cars
Technical & Vehicle Assistance Forums
Technical Assistance Vendor Classifieds
Mercedes Tech Talk
Wheels, Tires, Suspension & Brakes Forum
Audio & Electronics
Performance Upgrades & Tuning
Detailing & Automotive Care
Automotive Leasing & Financing
Extended Warranty Discussions
European Delivery of Your New Car
Vendor Market Place
Vendor Announcements
Vendor Specials
Vendor Group Buys
Vendor Classifieds
General Forums
General Mercedes Discussion
Safety & Testimonials
Marketplace
Collectibles, Models and Literature
Newsletter Archive
Mercedes-Benz Motorsports & Racing
Events & Gatherings
Kill Stories
Lifestyle
Regional areas
US
Asia-Oceania
Canada
Europe
Middle East
Site & Forum Support
Suggestions & Feedback
Questions about how MBWorld.org works...not for car questions.
Test
News
Gallery
Tools
Car Payment Calculator
Tire Rim Calculator
Vin Decoder
Recalls
Technical Service Bulletins (TSBs)
Members List
Live Feed
Marketplace
Marketplace
Mercedes AMG Cars For Sale
Mercedes Wheels and Tires For Sale
Mercedes AMG Wheels and Tires For Sale
Vendor Directory
Become a Vendor
Site Store
New Posts
How-Tos
About
View Dark Mode
Please register or login to enable Dark Mode.
Log In
Register
Threads
Google
Threads
Posts
Advanced
Dark Mode
Please register or login to enable Dark Mode.
Log In
Forgot your Password?
By logging into your account, you agree to our
Terms of Use
and
Privacy Policy
, and to the use of cookies as described therein.
or
Login with Google
Login with Facebook
Recent
Commented
Albums
My Pictures
My Post Pictures
pmgiarrizzo
September 1, 2015
144
0
Sort:
Most Recent
Default
Most Recent
Summer wheels back on (stored on OEM wheels) and back down to an appropriate height ;)
0
2017/04/10 07:25:23
pmgiarrizz...
0
2017/04/10 07:24:50
pmgiarrizz...
This dictates an 85W-90 oil for the non performance package cars, but this isn't my manual, my manual says 75W-85 hypoid gear oil.
0
2017/04/04 12:07:52
pmgiarrizz...
In place for the final time. Need my new Y-Pipe to install the rest of the intake.
0
2017/02/07 04:52:03
pmgiarrizz...
A view of that beautiful gaping hole.
0
2017/02/07 04:49:58
pmgiarrizz...
The View from front to back of it installed. Very very minimal clearance between the throttle body and Intake plenum, but she fit!
0
2017/02/07 04:46:45
pmgiarrizz...
Supercharger no more! Shes a tad dusty, little bit of wet spots that I didn't have a chance to clean up when I did the Valve Cover Gaskets.
0
2017/01/29 17:46:07
pmgiarrizz...
Close up of the gaskets, hoses and parts.
0
2017/01/29 17:45:09
pmgiarrizz...
all of the various bits and pieces laid out for organization and future cleaning.
0
2017/01/29 17:44:53
pmgiarrizz...
Very, very close fit to the surge tanks, and its clear of the fuel pressure dampener as well.
0
2017/01/29 17:44:38
pmgiarrizz...
Inlet bolted on temporarily to check fit. And she just clears the surge tanks and the fuel pressure dampener.
0
2017/01/29 17:44:25
pmgiarrizz...
Before Removal, Intakes out, surge tanks out, pcv hoses removed, fuel injectors disconnected, etc.
0
2017/01/29 17:40:34
pmgiarrizz...
After intercooler was removed. She's a bit dusty, but for a 2006 with 122,000kms, shes surprisingly very clean.
0
2017/01/29 17:26:44
pmgiarrizz...
Rear shot of assembly
0
2017/01/29 17:26:36
pmgiarrizz...
Supercharger assembly, fuel rail, intercooler, and OEM inlet.
0
2017/01/29 17:26:26
pmgiarrizz...
After porting and smoothing out the inside of the inlet. Don't let the bright aluminum at the bottom fool you. It is not protruding in anyway, its the camera angle. Its 90mm through and through. I then blended all the internal areas so that its a smooth transition from the 90mm opening to the rest of the inlet.
0
2017/01/26 05:32:22
pmgiarrizz...
Some minor blending work on the outside, not done yet, i want to smooth it out completely and then sand blast with coarse media for that OEM cast appearance.
0
2017/01/26 05:32:13
pmgiarrizz...
Marked up the gasket cut and drill areas before machining.
0
2017/01/24 12:11:59
pmgiarrizz...
A view through the hole. some porting will get rid of all of the "silver" aluminum in the way allowing for a full 90mm opening through and through.
0
2017/01/24 12:08:38
pmgiarrizz...
0
2017/01/24 12:06:29
pmgiarrizz...
Look ma! No hands! bolted and mounted as a test fit.
0
2017/01/24 12:05:07
pmgiarrizz...
This was a picture right before the final size cut (90mm). I don't have small hands/fingers, but damn that's a big hole
0
2017/01/24 12:04:31
pmgiarrizz...
A shot of the milling machine at work. Jig boring tool in the spindle.
0
2017/01/24 12:04:17
pmgiarrizz...
This area on the inside was built up with weld because this is where one of the new drilled and tapped holes for the 90mm TB.
0
2017/01/22 05:50:44
pmgiarrizz...
In the top right area of the bore is where the gasket showed me an overlap. Weld, weld, weld! Top two threaded holes were ground out and re-filled with weld.
0
2017/01/22 05:49:57
pmgiarrizz...
This was the same gasket and as you can see, a tonne of welding has been done and its 90% there. needs a couple more passes on the bottom and left side, but again, progress is progress. needed to see where and how much more needed to be done.
0
2017/01/20 13:46:28
pmgiarrizz...
This was a very quick skim cut on the mill today, some voids need to be filled, but its not done yet.
0
2017/01/20 13:46:20
pmgiarrizz...
This is after many hours of welding and welding and more welding. I used about 16 filler rods of aluminum that was 1/8" diameter.
0
2017/01/20 13:44:30
pmgiarrizz...
Really quickly hacked up a paper gasket to give me a rough idea of how much welding i had to do.
0
2017/01/20 13:43:39
pmgiarrizz...
0
2017/01/20 13:42:52
pmgiarrizz...
Started with a regular 74mm Snout from an E55 or CLS55
0
2017/01/20 13:42:40
pmgiarrizz...
0
2017/01/20 13:35:48
pmgiarrizz...
Before I went FSP, also on website.
0
2017/01/19 04:50:29
pmgiarrizz...
Before I went FSP. Also on the website
0
2017/01/19 04:50:12
pmgiarrizz...
Before I went FSP. This picture is on his website.
0
2017/01/19 04:49:56
pmgiarrizz...
NeedsWings Dual Intake Kit with Black Teflon Coating inside and out. OEM 74mm TB at the time.
0
2017/01/19 04:48:51
pmgiarrizz...
Currently the only installed picture I have, I was waaayy too excited to take pictures because I wanted to drive it asap.
0
2016/12/23 19:09:23
pmgiarrizz...
How it should look when installed on the car.
0
2016/12/23 19:08:33
pmgiarrizz...
The whole kit, all bolts, spacers, pulley and bracketry.
0
2016/12/23 19:07:34
pmgiarrizz...
Final product after anodizing and laser engraving my logo.
0
2016/11/24 11:53:32
pmgiarrizz...
First
Page
1 of 4
Last
Go To
Page
1
2
3
4
1 of 4
Go To
GO
Go to page
of 4
pages
1
2
3
4