MBWorld.org Forums
This is after the track obviously on my test the hood is on.
This is after the track obviously on my test the hood is on.
0 2016/09/13 15:00:08
0 2016/09/13 14:59:32
0 2016/09/13 14:58:57
@68 mph seems to go up by 1C° so from 65mph to 80mph there is only 1C° difference
@68 mph seems to go up by 1C° so from 65mph to 80mph there is only 1C° difference
0 2016/09/13 11:41:38
@78 mph seems to stay the same .
@78 mph seems to stay the same .
0 2016/09/13 11:38:30
Average crusing speed during both test.
Average crusing speed during both test.
0 2016/09/06 12:24:02
With short ram outside temp 76 degrees.
With short ram outside temp 76 degrees.
0 2016/09/06 12:23:00
Sounds clean asf im finally happy and there is no rattle does not suffucate my mids and highs and ppl compliment me everywhere of how clean the SQ is.
Sounds clean asf im finally happy and there is no rattle does not suffucate my mids and highs and ppl compliment me everywhere of how clean the SQ is.
0 2016/08/25 21:02:11
Mounting the goods.
Mounting the goods.
0 2016/08/25 01:04:58
Le sub
Le sub
0 2016/08/25 01:03:34
Hertz 6.5 bc quality is everything on a benz.
Hertz 6.5 bc quality is everything on a benz.
0 2016/08/23 01:11:12
0 2016/08/23 01:10:50
0 2016/08/23 01:10:21
Rca inputs
Rca inputs
0 2016/08/09 23:20:56
This
This
0 2016/08/05 13:34:43
Sub and deck
Sub and deck
0 2016/08/04 20:55:31
Deck
Deck
0 2016/08/04 20:54:44
Bolt close and done
Bolt close and done
0 2016/07/31 16:35:33
Clean and cover
Clean and cover
0 2016/07/31 16:34:34
Swap cut and bolt
Swap cut and bolt
0 2016/07/31 16:33:40
Tackled
Tackled
0 2016/07/31 16:33:07
0 2016/07/31 16:30:52
Swap and bolt
Swap and bolt
0 2016/07/31 16:29:35
Tackled,
Tackled,
0 2016/07/31 16:28:51
Installed and covered
Installed and covered
0 2016/07/31 16:20:16
Installed
Installed
0 2016/07/31 16:18:27
Tackled
Tackled
0 2016/07/31 16:16:22
0 2016/07/31 10:14:40
0 2016/07/31 09:25:02
U gonna remove the harness of this plug and the bolt inside then twist the tab down to break it free and pull it out ,(note there are 2 O rings inside make sure they came out otherwise pull them out ) your new part should imclude these.
U gonna remove the harness of this plug and the bolt inside then twist the tab down to break it free and pull it out ,(note there are 2 O rings inside make sure they came out otherwise pull them out ) your new part should imclude these.
0 2016/07/30 11:33:59
Now to insert the valve body back inside make sure you line these up these are the once that go bad and make the car lock in gear.
Now to insert the valve body back inside make sure you line these up these are the once that go bad and make the car lock in gear.
0 2016/07/30 11:29:00
Remove the transmission cover after u drain all fluid then u gonna remove these bolts here they are black this well alow you to remove the valve body.
Remove the transmission cover after u drain all fluid then u gonna remove these bolts here they are black this well alow you to remove the valve body.
0 2016/07/30 11:24:42
First you need to buy this transmission valve body plate and transmission fluid and might as well the filter to.
First you need to buy this transmission valve body plate and transmission fluid and might as well the filter to.
0 2016/07/30 11:22:00
This is what i got right now 18x9.5 285/35/18 and how it looks clears the fenders easy.
This is what i got right now 18x9.5 285/35/18 and how it looks clears the fenders easy.
0 2016/07/16 16:20:03
0 2016/06/09 16:25:39
Last time belt was seen alive.
Last time belt was seen alive.
0 2016/06/04 00:15:17
0 2016/06/04 00:14:28
0 2016/05/20 21:15:58
0 2016/05/20 21:15:14
0 2016/05/20 20:10:35