The Machinist
December 7, 2020
The adapters I made for the project. The one on the right adapts the M24x1.5 port to 1/4NPT—6JIC.
The part on the left has a 1/8NPT port for an oil pressure gauge as well as an M10x1.0 port for the OE pressure sender, with a pass through on either end for a hydraulic hose to the Accusump.
More About This Picture
Vehicle
N/A
Location
N/A
Keywords
N/A
Discover More Pictures
See MoreAdvertisement
Be the first to comment on this picture!