MBWorld.org Forums
My new Merc.
My new Merc.
0 2020/07/26 19:30:12
0 2020/07/26 20:02:20
The image seems to be rotated 90 degrees to the left.
The image seems to be rotated 90 degrees to the left.
0 2020/08/11 21:01:02
10th column over, Rc61 for the new bushing insert.
10th column over, Rc61 for the new bushing insert.
0 2020/08/12 08:18:55
60Rc for the dowel pin.
60Rc for the dowel pin.
0 2020/08/12 08:18:58
Look, a sideways Mercedes on a sideways boat.
Look, a sideways Mercedes on a sideways boat.
0 2020/08/13 07:35:52
The wheel on my big grinder.
The wheel on my big grinder.
0 2020/08/13 23:00:26
And just because I haven’t whored pictures of my A8 in years. There is Mercedes content.
And just because I haven’t whored pictures of my A8 in years. There is Mercedes content.
0 2020/08/13 23:04:33
Accusump accumulator.
Accusump accumulator.
0 2020/08/24 08:14:46
Drivers side intake cam.
Drivers side intake cam.
0 2020/08/29 12:24:52
0 2020/09/12 16:17:58
Fcking overspray.
Fcking overspray.
0 2020/09/12 16:18:13
0 2020/09/12 16:18:29
0 2020/09/12 16:18:47
0 2020/09/12 16:19:12
0 2020/09/12 16:19:41
0 2020/09/13 11:34:40
0 2020/09/17 22:52:51
0 2020/09/17 22:52:54
Ok, I give up trying to make these stand up straight. Ignore the angle measurements on this sketch, I fucked my trig up. Dimensions are accurate though.
Ok, I give up trying to make these stand up straight. Ignore the angle measurements on this sketch, I fucked my trig up. Dimensions are accurate though.
0 2020/09/17 22:55:23
Angles on this sketch are accurate. You’ll notice two lock pin bores on one part. That is because the parts are identical with the exception of the location of this lock pin bore. One sketch, two parts.
Angles on this sketch are accurate. You’ll notice two lock pin bores on one part. That is because the parts are identical with the exception of the location of this lock pin bore. One sketch, two parts.
0 2020/09/17 22:55:26
0 2020/09/18 23:27:15
4.2 v8 crammed into a B chassis. I was replacing a VVT solenoid that had been chewed through by a rodent.
4.2 v8 crammed into a B chassis. I was replacing a VVT solenoid that had been chewed through by a rodent.
0 2020/09/20 18:43:48
Roomy engine bay
Roomy engine bay
0 2020/09/20 18:43:53
The timing set is on the backside of the engine.
The timing set is on the backside of the engine.
0 2020/09/20 18:43:58
It’s down there somewhere.
It’s down there somewhere.
0 2020/09/20 18:44:01
Guess what I was doing here? Replacing a bypass hose on the water pump. Yep. I had to pull the nose off.
Guess what I was doing here? Replacing a bypass hose on the water pump. Yep. I had to pull the nose off.
0 2020/09/20 18:44:04
Close up of angle detail
Close up of angle detail
0 2020/09/21 12:37:50
The wavy looking part is coated with chrome.
The wavy looking part is coated with chrome.
0 2020/09/27 12:53:20
A similar part being finish machined
A similar part being finish machined
0 2020/09/27 12:53:22
Finish turning before coating and final grind
Finish turning before coating and final grind
0 2020/09/27 12:53:25
Finish grinding
Finish grinding
0 2020/09/27 12:53:28
Same parts after two years 24/7-365 in service mixing 70% limestone with 25% EVA and 5% carbon black 1000 hp electric motor
Same parts after two years 24/7-365 in service mixing 70% limestone with 25% EVA and 5% carbon black 1000 hp electric motor
0 2020/09/27 12:53:31
Different mixer, similar parts and product.
Different mixer, similar parts and product.
0 2020/09/27 12:53:34
The coating is only compromised where it suffered mechanical damage from sucking in FOD.
The coating is only compromised where it suffered mechanical damage from sucking in FOD.
0 2020/09/27 12:53:37
Freshly rebuilt rotors for an older style machine for a different customer.
Freshly rebuilt rotors for an older style machine for a different customer.
0 2020/09/27 12:53:40
0 2020/09/27 14:01:23
0 2020/09/28 14:47:04
0 2020/09/28 14:47:14
0 2020/09/28 14:47:23