MBWorld.org Forums
Also fixed all the pixels and added chrome rings to the cluster
Also fixed all the pixels and added chrome rings to the cluster
0 2022/01/24 20:19:13
Did some carbon wrapping on the interior too and programmed the double din finally.
Did some carbon wrapping on the interior too and programmed the double din finally.
0 2022/01/24 20:18:42
0 2022/01/24 20:18:28
0 2022/01/24 20:18:21
Better days. Tring to return to form.
Better days. Tring to return to form.
0 2022/01/24 20:18:01
New Harmonic Balancer test fit. Loos sweet.
New Harmonic Balancer test fit. Loos sweet.
0 2022/01/24 20:17:28
Heli coil that didn't end up holding. Getting to this point itself was a pain in the ass...never mind where I'm at today.
Heli coil that didn't end up holding. Getting to this point itself was a pain in the ass...never mind where I'm at today.
0 2022/01/24 20:10:17
0 2021/09/13 11:08:10
0 2021/09/13 11:08:05
Waterpump mounting surface. Note how I broke off a bolt in one of the holes and had to heli coil it.
Waterpump mounting surface. Note how I broke off a bolt in one of the holes and had to heli coil it.
0 2021/08/10 16:27:03
Gasket provided.
Gasket provided.
0 2021/08/10 16:26:59
Old waterpump.
Old waterpump.
0 2021/08/10 16:26:55
This is the timing cover I'm likely going to have to replace. MSRP ~ $500 CAD & likely hours and hours of labour,,,
This is the timing cover I'm likely going to have to replace. MSRP ~ $500 CAD & likely hours and hours of labour,,,
0 2020/04/17 17:22:21
CLK 430 is under the knife, so is the garage.
CLK 430 is under the knife, so is the garage.
0 2020/04/17 17:18:07
This is where I'm at right now...
This is where I'm at right now...
0 2020/04/17 17:17:56
Broken bolt on waterpump.
Broken bolt on waterpump.
0 2020/04/17 17:17:43
0 2020/01/17 21:04:12
Old voltage regulator versus new voltage regulator. Was surprised to see how much life was left.
Old voltage regulator versus new voltage regulator. Was surprised to see how much life was left.
0 2020/01/06 11:55:05
New voltage regulator installed.
New voltage regulator installed.
0 2020/01/06 11:54:58
Close up of the 36mm waterpump pulley bolt.
Close up of the 36mm waterpump pulley bolt.
0 2020/01/06 11:54:49
Old waterpump still in decent shape although the pulley was beginning to rattle/wobble a bit so good time ot replace it.
Old waterpump still in decent shape although the pulley was beginning to rattle/wobble a bit so good time ot replace it.
0 2020/01/06 11:46:27
New waterpump on.
New waterpump on.
0 2020/01/06 11:46:19
Waterpump off!
Waterpump off!
0 2020/01/06 11:46:12
Fan off!
Fan off!
0 2020/01/06 11:46:05
36mm skinny long wrench. Required IMHO.
36mm skinny long wrench. Required IMHO.
0 2020/01/06 11:45:58
This three bolt holder worked like a charm.
This three bolt holder worked like a charm.
0 2020/01/06 11:45:52
This tool broke. While trying to secure the pulley on the waterpump. Supplier will be sending me a new one.
This tool broke. While trying to secure the pulley on the waterpump. Supplier will be sending me a new one.
0 2020/01/06 11:45:44
Tool kit for waterpump fan removal.
Tool kit for waterpump fan removal.
0 2020/01/06 11:45:36
Alternator getting a quick polish and new voltage regulator.
Alternator getting a quick polish and new voltage regulator.
0 2020/01/06 11:45:29
Thermostat gasket.
Thermostat gasket.
0 2020/01/06 11:45:21
New thermostat installed.
New thermostat installed.
0 2020/01/06 11:45:14
This fan/fan clutch was a pain in the ass.
This fan/fan clutch was a pain in the ass.
0 2020/01/06 11:45:08
Front end is coming apart nicely.
Front end is coming apart nicely.
0 2020/01/06 11:45:01
Old waterpump. Still in decent shape for 220L
Old waterpump. Still in decent shape for 220L
0 2020/01/06 11:42:29
New waterpump installed.
New waterpump installed.
0 2020/01/06 11:42:21
Waterpump off.
Waterpump off.
0 2020/01/06 11:42:15
Fan clutch off.
Fan clutch off.
0 2020/01/06 11:42:08
36mm long skinny wrench.
36mm long skinny wrench.
0 2020/01/06 11:42:01
This three bolt holder worked like a charm. Should have started with this one.
This three bolt holder worked like a charm. Should have started with this one.
0 2020/01/06 11:41:55
First tool I tried broke. Supplier will be sending me a new one in the mail.
First tool I tried broke. Supplier will be sending me a new one in the mail.
0 2020/01/06 11:41:48