If your CLK55 has Parametric steering option - Please Help.




I'm working on my last mod (hopefully) which is retrofitting the parametric steering (code 213) which was available on the CLK55 / 63 and the black series. The rack is fitted, the wiring harness is installed. My ECU, even though coded correctly, will not energize the solenoid valve on the rack. I sourced the rack from MB direct, plus tested the solenoid which works when energized directly. I know that is all OK.
EPCnet is very difficult to dicifer as to the correct ECU to get. I'm hoping that you guys that have this option on your CLK55 (preferably 2005) can give me the part number that's on your ESP ECU. It's the control unit attached to your ABS pump front left (DS) corner of the engine compartment.
My best research has ECU p/n: 036 540 04 01 as being the correct ECU as it is shown for 203 and 209 cars and for 209 cars is shown with 213 coding.
There is another post going on about the changes between CLK and C 55's - I'm following that post to see if ESP settings are the same between the two.
203-460-1300 up to chassis a666024 (check the last digits of your VIN)
203-460-5200 from a555897
Basically first one is for 2001-2004
second one is 2005-2006
To check your ESP, 213 PML may be stamped on the front of it. Check engine bay.
OLD ESP no. are weeded out of EPC but the current ESP modules are
209-545-0832, 0932, 1032 which all support this mod
If you must replace your rack, might as well replace it with this rack and update the ESP module later on. The rack will function as a regular rack if you don't have it wired up.




I triple checked and verified with Steve and Wanda before buying the rack, which is the 52 00 number noted correctly for 05 / 06 cars in Sunil's post. I'll research those ESP numbers also.
I added the factory wiring harness, which is from pins 13 and 44 at the ESP harness to connection point 18/33 at the frame rail, and from there down to the solenoid valve. When the solenoid is energize directly the valve is opened and the steering responses correctly. The rack is much tighter in ratio overall, also. Pins 13 and 44 are present on the ESP pictured, which is not a valid number with MB or EPCnet. Module 034 545 72 32 is now the current direct number for a C55 but that does not actually list code 213, like 036 540 04 01 does.
https://mbworld.org/forums/suspensio...ndling-1k.html




Is there anyone out there with this option on there CLK that can read the ECU part number and advise?








The stock ECU 034 545 77 32, turns out, does not have the PML or 213 capability. Sourced a 034 545 78 32 and option 213 is listed on the ECU housing. The ...78 32 is for both W209 and W203.
Option 219 - Distronic is also listed. Hmmm, might just be a new project.
Trending Topics
The Best of Mercedes & AMG







