ML320 BAS ESP and ETS Lights....
Thread Starter
Almost a Member!
Joined: Apr 2002
Posts: 51
Likes: 0
From: Phoenix, AZ USA
ML320
ML320 BAS ESP and ETS Lights....
I just took my car in for a 30,000 mile check up and they replaced the brakes, before i took the car in the bas esp and ets lights would come on during driving (didnt notice any particular pattern just random times). I wrote on the service note that these lights needed to be checked, (figuring they would find it anyways) but when i got the car back, the lights came on more often. Not even after a long drive, like i would start it in the morning and those lights would come on right away. I know bas esp is brake assistance system or something, but i just got new brakes installed, is this a malfunction? should i take it in?
Super Member
Joined: Apr 2002
Posts: 877
Likes: 0
asdf
When you changed your brakes were they under warantee? I assumed that they were but when my low brake pad light came on yesterday they said it wasn't and that they were going to charge me close to $300 just for the front two. Also, do you know if your service light needs to be on to make an appointment for a service? My car is closing in close to 40,000 and I want to have it serviced before my warantee is over. Haha, call me cheap but I'm just wondering.
Thread Starter
Almost a Member!
Joined: Apr 2002
Posts: 51
Likes: 0
From: Phoenix, AZ USA
ML320
nope brakes werent under warranty, it was 500 for front and back brakes, plus i got a full service done just 2 weeks ago, service light isnt on, but i thought they would have found out this problem. Everything was done by the dealership so nothing can be blamed on a poor job by some off brand company, maybe ill take it in and ask what the deal is.
MBWorld Fanatic!
Joined: Nov 2001
Posts: 2,332
Likes: 1
From: Bloomington, IN
1997 Toyota Tacoma 4x4
The brake pad wearing and the BAS/ESP warning lights have nothing to do with each other, believe it or not. I'd say your most likely cause is a stop-lamp switch, followed by a steering angle sensor, or a booster diaphragm travel sensor.
Thread Starter
Almost a Member!
Joined: Apr 2002
Posts: 51
Likes: 0
From: Phoenix, AZ USA
ML320
lol well then, i think i understand russian better, think you could put it in simpler terms for me, being new to the mercedes ml and all lol, thanks for your help though
MBWorld Fanatic!
Joined: Nov 2001
Posts: 2,332
Likes: 1
From: Bloomington, IN
1997 Toyota Tacoma 4x4
Sorry:
The stop-lamp switch is used to tell the control module when you're pressing the brake pedal. The control module then turns the brake lights on.
The steering angle sensor is on the steering column, under the dash. It tells the control module how far you're turning the steering wheel. If this is bad, the entire steering shaft has to be replaced.
The booster diaphragm travel sensor is located in the brake booster, and tells the control module how hard you're pushing the brake pedal and how quickly.
The stop-lamp switch is used to tell the control module when you're pressing the brake pedal. The control module then turns the brake lights on.
The steering angle sensor is on the steering column, under the dash. It tells the control module how far you're turning the steering wheel. If this is bad, the entire steering shaft has to be replaced.
The booster diaphragm travel sensor is located in the brake booster, and tells the control module how hard you're pushing the brake pedal and how quickly.
Trending Topics
Newbie
Joined: Dec 2005
Posts: 12
Likes: 0
etx/abs
If this is true, then a faulty switch would not notify the control module to turn on the brake lights. On my car, the ETS/ABS lights are on but the brake lights come on as they are supposed to. I just replaced my brakes and the brake pad sensor was OK so I didn't change it. (The lights were on before I changed the pads.) I don't think changing brake pads should be a dealer problem as it took me about 45 min to change all 4 wheels. However, the pads are a bit pricy! How do I get the ETS/ABS lights to go off. One other piece of info - The vehicle was towed for 14 miles with a front wheel dolly with the battery disconnected. Did I hurt it?
MB World Stories
The Best of Mercedes & AMG
7 Craziest Things AMG Gas Ever Built
Verdad Gallardo
New Electric Mercedes-AMG GT 4-Door Coupe Unveiled: 10 Things You Need to Know
Verdad Gallardo
6 Mercedes Models That Did NOT Age Well (But Are Somehow Still Cool)
Verdad Gallardo
Manual Mercedes? 6 Times Sindelfingen Let Drivers Have All The Fun
Verdad Gallardo
Mercedes SLR McLaren 722 S Is Extremely Rare Example Modified by McLaren
Verdad Gallardo
8 Classic Boxy Mercedes Designs That Have Aged Like Fine Wine
Verdad Gallardo
Flawlessly Restored Mercedes 190E Evo II Heads to Auction
Verdad Gallardo
Electric Mercedes C-Class Unveiled: 11 Things You Need to Know
Verdad Gallardo
Mercedes EQS Gets A Major Update: Everything You Need to Know
Verdad Gallardo
Member
Joined: Feb 2006
Posts: 81
Likes: 0
No a faulty stop lamp switch can still fault the ABS/ESP but work the brake lights. Sounds like a wiring modifiaction required, common problem with ML and C class, ask your dealer, as three wires leading to the ABS unit sometimes need to be modified.
Newbie
Joined: Jun 2007
Posts: 4
Likes: 0
ESP light on the Dash
Hey ppl...
My 4th Merc.... 2001 ML 320 that i bought a week ago is giving me a bit of trouble.... There is a ESP warning light flashing on the dash whenever the truck is started..... I took it to the dealership and they told me that it would cost $250 just to observe the problem.... this wasnt something I could afford....
my dad also says the breaking of the truck is not upto standards.... on checking with the dealer... he confirms new breaks for the truck...
I have tried to read about how to go about solving this problem.... but havnt been able to get anywere..... can any1 please help me out in a simple laymans language...
Thanks
Angad
My 4th Merc.... 2001 ML 320 that i bought a week ago is giving me a bit of trouble.... There is a ESP warning light flashing on the dash whenever the truck is started..... I took it to the dealership and they told me that it would cost $250 just to observe the problem.... this wasnt something I could afford....
my dad also says the breaking of the truck is not upto standards.... on checking with the dealer... he confirms new breaks for the truck...
I have tried to read about how to go about solving this problem.... but havnt been able to get anywere..... can any1 please help me out in a simple laymans language...
Thanks
Angad
Newbie
Joined: Jun 2007
Posts: 4
Likes: 0
I understand that its no lay mans job..... but im new to canada and simply cant afford to go the MB Dealership.....
If someone can point out the problem I could take it to a regular mechanic and help him diagnose the problem.....
help needed... please....
If someone can point out the problem I could take it to a regular mechanic and help him diagnose the problem.....
help needed... please....
