Affalterbach Shifter and Command controller
#1
Super Member
Thread Starter
Affalterbach Shifter and Command controller
I know a lot of people including myself were interested in the Affalterbach Edition shifter. I priced it at the dealer and it was over $1,000 AUS and you had to buy the whole shifter and boot apparently.
I decided to make my own and also did the command controller knob.
I decided to make my own and also did the command controller knob.
#4
Super Member
Thread Starter
Very easy. Bought 2 emblems and removed the backing tape that was on them and used my own. Normal double sided tape on shifter and 2 layers of 3M tape on Command controller. They cost me around $20 each plus shipping. I bought them from here http://www.myroadster.net/
#5
MBWorld Fanatic!
Join Date: Dec 2006
Location: Livingston NJ
Posts: 3,278
Likes: 0
Received 3 Likes
on
3 Posts
C63, Grigio Medio E46 M3
Very easy. Bought 2 emblems and removed the backing tape that was on them and used my own. Normal double sided tape on shifter and 2 layers of 3M tape on Command controller. They cost me around $20 each plus shipping. I bought them from here http://www.myroadster.net/
#6
Super Member
Thread Starter
Sorry. here you go http://www.formymercedes.com/morepic...mg7=s-19-7.jpg
You can email ger.jones@comcast.net and ask for the emblems on there own
You can email ger.jones@comcast.net and ask for the emblems on there own
Trending Topics
#13
MBWorld Fanatic!
#15
MBWorld Fanatic!
I wrote then an email a few days ago but didnt get any response.
Where can I find the emblem on their website?
EDIT: I read your previous post that you have to ask for the emblems. I'll write them another email.
Where can I find the emblem on their website?
EDIT: I read your previous post that you have to ask for the emblems. I'll write them another email.
Last edited by olszowa12; 01-28-2011 at 04:31 AM.
#17
MBWorld Fanatic!
I received my emblem from Jerry a ForMyMercedes but I'm not happy about the way it's glued on top of the original gear shifter emblem.
Does anyone know if we can take out the old emblem and insert a new one?
Does anyone know if we can take out the old emblem and insert a new one?
#18
MBWorld Fanatic!
I don't know if you can remove the original MB decal. But I would just remove the adhesive tape that came with the Affalterbach Crest, and glue it on. That way it will lay flat on top of the original. Just my two cents
#20
MBWorld Fanatic!
I want to keep my original shift knob. I don't think the 100bucks knob are covered with leather.
Last edited by olszowa12; 02-16-2011 at 01:32 PM.
#22
MBWorld Fanatic!
#23
MBWorld Fanatic!
Join Date: Nov 2001
Location: The Magic City
Posts: 5,107
Likes: 0
Received 0 Likes
on
0 Posts
C63
When did you order it? I emailed him & he told me that he was out of them.
#25
Super Member
Thread Starter
You need to remove the white tape that the emblem came with when you bought it off Jerry. I then used very thin double sided tape and stuck it over the top of MB emblem on the shifter. Have a look at my the pics on the first post.