Affalterbach Shifter and Command controller
#26
#30
MBWorld Fanatic!
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230
I thought that, I would post two pictures of the Affalterbach Crest, mounted on my C63 shifter and COMAND control knob.
Last edited by Yuille36; 02-21-2011 at 01:33 PM.
#31
#35
MBWorld Fanatic!
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230
Jerry is good people, I bought a set of wheels from him years ago, and well as other stuff. And he always gives me a good deal on pricing.
#36
MBWorld Fanatic!
Joined: Nov 2009
Posts: 4,421
Likes: 384
From: Relocated
2010 Irridium Silver MB C63 AMG Sedan
#37
MBWorld Fanatic!
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230
I have bought dentist tools years ago at a flea market, I have used them to clean my guns over the years, digging carbon bits out of cracks and such. But I have tried getting a hook on hte edges of the Star, to try and pry it loose. But it didn't work. They must use super glue to hold it in place.
#40
MBWorld Fanatic!
Joined: Jul 2008
Posts: 1,021
Likes: 0
From: Massachusetts
'14 911S (garage queen) '13 X3 (family hauler)
#42
#43
MBWorld Fanatic!
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230
Here are a few more pictures that, I took a few minutes ago with my iPhone.
You can see that my crest sits flush on the shift knob.
These decals are made from thin aluminum, then as paper and are fragile.
my crest mounted on the COMAND knob.
Another pic, so that you can see how the decal sits flush.
My decal again from a top view
A shot from the top
You can see that my crest sits flush on the shift knob.
These decals are made from thin aluminum, then as paper and are fragile.
my crest mounted on the COMAND knob.
Another pic, so that you can see how the decal sits flush.
My decal again from a top view
A shot from the top
#44
That's a lot of AMG emblems and crests
I played around with some matte black vinyl I had in the garage. I wrapped the grey shifter surrounding and it looks much better IMO.
I have to order some gloss black vinyl so it will match the transmission setup button.
I played around with some matte black vinyl I had in the garage. I wrapped the grey shifter surrounding and it looks much better IMO.
I have to order some gloss black vinyl so it will match the transmission setup button.
Last edited by olszowa12; 03-02-2011 at 04:22 PM.
#45
Yullie36,
as I was taking off my "iDrive" controller cover, I took off the center of the controller as well. Maybe you could put the Affalterbach emblem inside so it looks more flush
as I was taking off my "iDrive" controller cover, I took off the center of the controller as well. Maybe you could put the Affalterbach emblem inside so it looks more flush
#46
Here are a few more pictures that, I took a few minutes ago with my iPhone.
You can see that my crest sits flush on the shift knob.
These decals are made from thin aluminum, then as paper and are fragile.
my crest mounted on the COMAND knob.
Another pic, so that you can see how the decal sits flush.
My decal again from a top view
A shot from the top
You can see that my crest sits flush on the shift knob.
These decals are made from thin aluminum, then as paper and are fragile.
my crest mounted on the COMAND knob.
Another pic, so that you can see how the decal sits flush.
My decal again from a top view
A shot from the top
#48
#49
MBWorld Fanatic!
Joined: Apr 2009
Posts: 5,995
Likes: 516
From: Alexandria, VA
07 E63 AMG, 10 C63 AMG, 07 E63 Designo, 07 E350, 09 C300, 07 C230