2 Questions...My 1st CLK
#1
Junior Member
Thread Starter
2 Questions...My 1st CLK
Hello everyone...I just joined this forum! I recently got a my first Benz 03/CLK 200
I fixed couple of things here and there but I have this light sensor message display on the dashboard. A local garage said the sensor is probably fine but I have to replace my windshield with an original one? Is this true or maybe the sensor is bad?
"The windshield isn't original"
Does Mercedes has a software where I can connect my laptop to the car and adjust the lightings...etc like BMW? If yes what is the name of it?
Thanks
I fixed couple of things here and there but I have this light sensor message display on the dashboard. A local garage said the sensor is probably fine but I have to replace my windshield with an original one? Is this true or maybe the sensor is bad?
"The windshield isn't original"
Does Mercedes has a software where I can connect my laptop to the car and adjust the lightings...etc like BMW? If yes what is the name of it?
Thanks
Last edited by MeInQ8; 12-20-2014 at 08:15 AM.
#2
Super Member
Join Date: Mar 2010
Location: Lebanon
Posts: 684
Likes: 0
Received 11 Likes
on
11 Posts
2007 BMW 550i
I dought thats the issue.. They replaced my 2004 c230 windshield with a non original one and everything works fine.. Its pretty rare for the light sensor to stop working. If they changed ur windshield they might have just messed up the connectors in the overhead panel (dome light has a small computer). You can search around the forum for pictures, its really easy to remove to remove and check the connections are all good.
#3
Super Member
Join Date: Mar 2010
Location: Lebanon
Posts: 684
Likes: 0
Received 11 Likes
on
11 Posts
2007 BMW 550i
And yes there is software like that but its not as simple as the BMW software you might be used too. There is no independent software that can access deep settings in the computer except STAR Diagnosis (DAS in german). There are Chinese knockoffs everywhere online. Usually they work just fine, but dont go for the ones that are too cheap.
#4
Junior Member
Thread Starter
I hope so since the windshield look pretty decent but I will check it.
Thanks
Thanks
I dought thats the issue.. They replaced my 2004 c230 windshield with a non original one and everything works fine.. Its pretty rare for the light sensor to stop working. If they changed ur windshield they might have just messed up the connectors in the overhead panel (dome light has a small computer). You can search around the forum for pictures, its really easy to remove to remove and check the connections are all good.
Last edited by MeInQ8; 12-21-2014 at 05:05 AM.
#5
Junior Member
Thread Starter
This isn't a simple data cable/software to install in my laptop but do you mean this? http://www.ebay.com/itm/Mb-Star-C3-M...-/161518066007 $$$
And yes there is software like that but its not as simple as the BMW software you might be used too. There is no independent software that can access deep settings in the computer except STAR Diagnosis (DAS in german). There are Chinese knockoffs everywhere online. Usually they work just fine, but dont go for the ones that are too cheap.
Last edited by MeInQ8; 12-21-2014 at 05:07 AM.
#6
Super Member
Join Date: Mar 2010
Location: Lebanon
Posts: 684
Likes: 0
Received 11 Likes
on
11 Posts
2007 BMW 550i
Yes thats it, thats the old c3 works fine on our cars theres the c4, i dont know if theres anything newer. They work on ibm laptops, but these days thy just give you a hdd that you plug in and it works running windows xp in a virtual environment. You should check out some threads specifically about the scanners before thinking about buying one. I dont know much about the differences.
This isn't a simple data cable/software to install in my laptop but do you mean this? http://www.ebay.com/itm/Mb-Star-C3-M...-/161518066007 $$$
Trending Topics
#9
Junior Member
Thread Starter
I just pulled it myself and I found mad silicon on the sensor cleaned that off with my nail still didn't work and the error still there. Found a used one from another car plugged it in the error is now gone but still the lights still on?
What to check next?
What to check next?
Last edited by MeInQ8; 12-27-2014 at 01:37 PM.
#10
Junior Member
Thread Starter
FIXED!!!!
I can't believe this a tech got it fixed from the user computer in the car, now when the switch at position 0 all light are off finally lol
I can't believe this a tech got it fixed from the user computer in the car, now when the switch at position 0 all light are off finally lol
#12
Super Member
Join Date: Mar 2010
Location: Lebanon
Posts: 684
Likes: 0
Received 11 Likes
on
11 Posts
2007 BMW 550i
That's really weird, I don't think I've seen an option in STAR to do that. Maybe your new light sensor was from another car without a green band at the top of the windscreen. Oh maybe that's it, does your new windscreen have a slightly darker band at the top of the windscreen?
#13
Junior Member
Thread Starter
Sorry for the late reply
Not in STAR... it an option in the cluster instrument "user function" I got the light sensor from another CLK same year.
Not in STAR... it an option in the cluster instrument "user function" I got the light sensor from another CLK same year.
That's really weird, I don't think I've seen an option in STAR to do that. Maybe your new light sensor was from another car without a green band at the top of the windscreen. Oh maybe that's it, does your new windscreen have a slightly darker band at the top of the windscreen?