Ghostrider@P1 Performance

Here we go!!! Attached you will find a picture of the new end and a picture of the complete kit with the old ends.

Kit Price: $180 shipped to the lower 48 states.

Includes:

(2) Aluminum Hex Rods
(4) Squeak Free (SqF) Ends
(4) Lock Nuts

The SqF Ends can be sold separately for those that have other kits.

W201 Chassis
190E 2.3 2.6 190D 2.2 2.5 Turbo 16V 84-93

W124 Chassis
300E/CE/TE 260E 300D 300D-Trb 300TD & Turbo 400E 500E E420 E500 E320 86-95 Sedan Coupe Cabriolet Wagon & 4-Mtcs

W202 Chassis
C220 C230 C280 C36 AMG C43 AMG 94-02

W203 Chassis
C230K C240 C32 AMG C55 AMG 03-06

W129 Chassis
300SL 500SL 600SL SL320 SL500 SL600 Convertible 90-02

W208 Chassis
CLK320 CLK430 CLK55 AMG 98-03 Coupe and Cabriolet

W210 Chassis
E320 E420 E430 E55 AMG 98-02 Sedan and Wagon

W209 Chassis
CLK320 CLK500 CLK55 AMG 03-05 Coupe Cabriolet

R170 Chassis
SLK230 SLK320 SLK32 AMG

Please let me know if you are interested in a kit or just the ends:

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Ghostrider@P1 Performance

Here is what the complete kit looks like now:

Ghostrider@P1 Performance

https://mbworld.org/forums/c-class-w...-thread-6.html

Ghostrider@P1 Performance

https://mbworld.org/forums/c-class-w...amber-kit.html

Ghostrider@P1 Performance

Kits are still available at the new low Group Buy price of $170!!

Ghostrider@P1 Performance

I have a couple of early design kits that I letting go cheap. PM me for details.

-Ghost

Ghostrider@P1 Performance

I still have a few kits available from the most recent production run. PM me for details.

-Ghost

ron m.

My Speedybenz camber ends have squeaked since I got them, and I noticed significant abnormal (feathering) wear on one of my rear wheels. Turns out the ball sleeve on one side is shot and the arm had a lot of play.

I called Melvin and initially said that I probably just want to buy his rubber ends. He was more than accomodating and gave me a ridiculuously good price and even assured me that if his ends are incompatible with Speedybenz bars that he will sell me the remainder of the kit for a good price. Well, it turns out they were incompatible. I sent Melvin another payment on Monday and got the balance of the parts yesterday... that's fast!

The kit looks beautiful... I got the gold rods, which I personally think look better than the black ones (but who looks at suspension components anyway?). I will be installing them tomorrow with some pictures.

Just want to say GREAT, GREAT service from P1 Performance and Melvin, matched by an equally great looking product. Thanks!

Ghostrider@P1 Performance

Wow. Thanks Ron!! You are the first member with the gold rods.

Also, what Ron is failing to mention, this was more of a team effort that called for him to do most of the work. I simply supplied the parts and for that I do thank you. Bummer about the ends not working with the SpeedyBenz kit though...

ron m.

Since I've obviously done this before, removing and installing the camber ends is a fairly easy task, even easier if you have air tools. You just need a T55 torx bit to remove one of the bolts. Each side took less than 30 minutes.

Once the old Speedybenz unit was off, I just lined up the holes of the old and new unit (put them on top of each other) so that they are relatively the same distance (I don't plan on having another alignment done until after I completely wear out my rear tire... it is advisable to do an alignment after any suspension work). I put in probably 60K on the Speedybenz unit, and they have been squeaking ever since I owned them. Furthermore, all four ends of the old arms were damaged (the wheels wobbled at least 1/8 side to side and the ball joints on the ends were scored, the sleeves were shattered and races were gone).

Once I installed the new ends, I did the wiggle test and noticed ZERO wiggle. Not only that, these arms made the rest of my rear suspension look like crap... haha!

Thanks again for the help, Melvin. All you guys with the Speedybenz units (or Lensolos) should consider getting these or end up changing tires more often (which is the reason why we got these things in the first place).

bad hare

I'm in dire need of a camber kit.
how do we do this?

blue960

im using H&R spring and 19"x10 on the rear .. squat a bit .. when going thru a bump at high speed i can feel the rear end swaying when touching the asphalt.. will this camber kit solve the problem?

Ghostrider@P1 Performance

You have PM!

Ghostrider@P1 Performance

Yes it would. It will help to maximize your tires contact with the pavement as well.

bad hare

H&R sport & what pad # are you using?

I'll check it tonight.

gotta run thx . by any chance, do you have a website?

blue960

using pad #2 (2nd bfore the thinnest pad) on H&R sport spring

bad hare

ok.
I'm going w/ the #1 pad on 18 x 9 or 9.5 unless i can find another wheel i like w/ a wider option. 19's are deadly in ny.

Ghostrider@P1 Performance

Not really, just the information posted here in the forums.

bad hare

i'm still interested in this.
i gotta remember to do the paypal when i get home.

Ghostrider@P1 Performance

I already have it packed up and ready to go!

C230Kreepin'

Hi, i'm pretty new to the Benz game and was wondering if you still had the gold bar camber kits for sale?

Ghostrider@P1 Performance

Yes I do. I will PM you the details.

benz.brooke

i'd appreciate some details on the black bar camber kits, please and thank you!

ohlord

You going down to Portland for the Mercedes show and shine this weekend?

Ghostrider@P1 Performance

You have PM.