V8 LS-190 rack and pinion mounted
#1
Junior Member
Thread Starter
Join Date: Nov 2006
Location: Phoenix, AZ
Posts: 55
Likes: 0
Received 1 Like
on
1 Post
'07 Toyota Tacoma, '89 LS190, '07 Kawasaki Ultra 250X
V8 LS-190 rack and pinion mounted
Mounted the rack and pinion and started patching some holes.
Sheet metal work takes alot of time
It will all be seam-sealed and painted when its done
![](http://i135.photobucket.com/albums/q136/gen3benz/LS1front.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/LS1front_low.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/LS1frontcrossmember.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/rackfronthigh.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/sshaftpatch.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/psidepatch.jpg)
5.7L LS1 v8 aluminum block and heads
c5 motor mounts and aluminum brackets
c6 exhaust manifolds(until I make some long tube headers)
GTO front sump pan
custom crossmember made from 3/16 steel plate and square tube
Sheet metal work takes alot of time
It will all be seam-sealed and painted when its done
![](http://i135.photobucket.com/albums/q136/gen3benz/LS1front.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/LS1front_low.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/LS1frontcrossmember.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/rackfronthigh.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/sshaftpatch.jpg)
![](http://i135.photobucket.com/albums/q136/gen3benz/psidepatch.jpg)
5.7L LS1 v8 aluminum block and heads
c5 motor mounts and aluminum brackets
c6 exhaust manifolds(until I make some long tube headers)
GTO front sump pan
custom crossmember made from 3/16 steel plate and square tube