W208 Instrument CLuster LED problem...RECALL
07-27-2007, 06:31 PM
#1
Newbie
Thread Starter
Join Date: Jul 2007
Location: South Texas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 430, 1988 560SL & 1985 300SD
W208 Instrument CLuster LED problem...RECALL
I filed a complaint with the nhtsa.gov for the faulty display readouts that many of us have/are experiencing. It IS A SAFETY problem since it you can't see which gear you are in and that could cause a driver error that could lead to an accident.
The more of us complain the more likely they are to issue a recall and require the MBUSA to cover our this problem.
Call 1-888-327-4236 and have your VIN # ready so they can file the complaint. (Other Mercedes models have had this issue recalled and fixed)
The more of us complain the more likely they are to issue a recall and require the MBUSA to cover our this problem.
Call 1-888-327-4236 and have your VIN # ready so they can file the complaint. (Other Mercedes models have had this issue recalled and fixed)
07-27-2007, 09:18 PM
#4
Newbie
Thread Starter
Join Date: Jul 2007
Location: South Texas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 430, 1988 560SL & 1985 300SD
There could be re-imbursement
if you paid out of pocket to have yours fixed already. I just think it should be addressed by MB.
Trending Topics
07-29-2007, 06:19 PM
#9
Senior Member
Join Date: Sep 2006
Location: NorCal
Posts: 303
Likes: 0
Received 0 Likes
on
0 Posts
BMW
Thanks for the heads up.
My LED's burned out on both sides. I can't believe that MB doesn't do anything about it.
In the BMW 740, it's also a common problem, but if you contact BMWNA, they take care of your problem for free. Sometimes they make you pay labor, which is about $250 at the most. But its def. better than paying $1k+
My LED's burned out on both sides. I can't believe that MB doesn't do anything about it.
In the BMW 740, it's also a common problem, but if you contact BMWNA, they take care of your problem for free. Sometimes they make you pay labor, which is about $250 at the most. But its def. better than paying $1k+
07-29-2007, 10:26 PM
#10
MBWorld Fanatic!
Join Date: May 2006
Location: San Antonio, Tx
Posts: 1,486
Likes: 0
Received 4 Likes
on
4 Posts
2000 CLK430
I had the exact same pixel problem on my 00 CLK430 and I paid a guy in Germany while I was stationed there to fix it for me 100 bucks and it only took him about 30 min to do the job. I found him on Ebay and just drove to his house.
I will definitely call in as well in case they go out again.
Greg
I will definitely call in as well in case they go out again.
Greg
08-02-2007, 03:08 PM
#13
Almost a Member!
Join Date: Aug 2003
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
01 E55 AMG
This is a very common issue also on the E class
Had mine (01 E55) fixed for less than $300. Dealer wanted $1,200. Here is the company:
http://cgi.ebay.com/ebaymotors/Merce...spagenameZWDVW
Easy and great service.
http://cgi.ebay.com/ebaymotors/Merce...spagenameZWDVW
Easy and great service.
08-02-2007, 04:55 PM
#15
Newbie
Thread Starter
Join Date: Jul 2007
Location: South Texas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 430, 1988 560SL & 1985 300SD
Thanks for info Wagondad...BUT
It's just the principle that MB should take care of this if they wish to uphold their quality and reputation. But I will look into BBA if I get tired of waiting! Still think ALL owners should complain WHETHER OR NOT they've had their cluster fixed. IT'S THE PRINCIPLE and it pisses me off.
08-02-2007, 07:15 PM
#16
Newbie
Join Date: Jul 2004
Location: San Diego
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2000 CLK430 Cab Designo Blue - K40 2000 Radar With Diffusers, Euro COMAND by MBENZNL
Display Readouts
I filed a complaint with the nhtsa.gov for the faulty display readouts that many of us have/are experiencing. It IS A SAFETY problem since it you can't see which gear you are in and that could cause a driver error that could lead to an accident.
The more of us complain the more likely they are to issue a recall and require the MBUSA to cover our this problem.
Call 1-888-327-4236 and have your VIN # ready so they can file the complaint. (Other Mercedes models have had this issue recalled and fixed)
The more of us complain the more likely they are to issue a recall and require the MBUSA to cover our this problem.
Call 1-888-327-4236 and have your VIN # ready so they can file the complaint. (Other Mercedes models have had this issue recalled and fixed)
08-08-2007, 07:42 PM
#19
Newbie
Thread Starter
Join Date: Jul 2007
Location: South Texas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 430, 1988 560SL & 1985 300SD
Hope everyoneis mentioning the SAFETY aspect here...
You could be in a situation in which you can't see what gear car is in at a crucial moment! That's what they are looking for: The safety issue!
08-26-2007, 09:24 PM
#21
Newbie
Join Date: Apr 2007
Location: Columbia, MO
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 430 Cabriolet
Transmission electronics...RECALL
Let's get on the wagon and call in about the transmission electronics, too. I not only have the LED issues with my instrument cluster, but my doggone transmission "sticks" in certain gears -- 2nd sometimes, 3rd sometimes. Really starting to p*ss me off. I've read plenty about the design of the "cupholder" and the high probability of spilling liquid into the transmission area, causing issues with the transmission electronics. According to NHTSA, at least 10 people have filed complaints, but they tend to deny them, stating that there's no safety issue. Holy mackerel...being stuck in 3rd gear is definitely a safety issue. Just try to get out of an idiot's way or even leave a stoplight in third gear. Not happening... I'm definitely filing about both my instrument cluster AND my squirrely transmission. Please help me if you have the issue, too...
08-28-2007, 06:35 AM
#22
Newbie
Join Date: Aug 2007
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
clk 430
pgmc
bought an 01/ 430. Had complete automotive inspection undertaken b4 purchase. One week later the dash o/s temp, clock, and gear indicator have random reading problems. Dealer doesnt want to know me now. Anyone have fix tips?
08-28-2007, 04:44 PM
#23
Newbie
Thread Starter
Join Date: Jul 2007
Location: South Texas
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
2001 CLK 430, 1988 560SL & 1985 300SD
Dude...THat's Why Many Of Us are Complaining To NHTSA!
You Should Too!!!
But if you want to get it fixed...these guys can do it for about $250, but you have to send it to them.
BBA Remanufacturing Inc?300 Myles Standish Blvd.?Taunton, MA 02780
(866) 573-2740?us-sales@bba-reman.com?www.bba-reman.com
But if you want to get it fixed...these guys can do it for about $250, but you have to send it to them.
BBA Remanufacturing Inc?300 Myles Standish Blvd.?Taunton, MA 02780
(866) 573-2740?us-sales@bba-reman.com?www.bba-reman.com
08-29-2007, 11:01 PM
#24
Almost a Member!
Join Date: Mar 2007
Location: Puerto Rico
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
CLK 430
I filed a complaint with the nhtsa.gov for the faulty display readouts that many of us have/are experiencing. It IS A SAFETY problem since it you can't see which gear you are in and that could cause a driver error that could lead to an accident.
The more of us complain the more likely they are to issue a recall and require the MBUSA to cover our this problem.
Call 1-888-327-4236 and have your VIN # ready so they can file the complaint. (Other Mercedes models have had this issue recalled and fixed)
The more of us complain the more likely they are to issue a recall and require the MBUSA to cover our this problem.
Call 1-888-327-4236 and have your VIN # ready so they can file the complaint. (Other Mercedes models have had this issue recalled and fixed)
Anyways...just filed my complaint.
08-31-2007, 08:13 AM
#25
Newbie
Join Date: Aug 2007
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
clk 430
mate, live in Noosa, Australia. not going to call the US to report my issue.
MB should recognise their build quality issues and assist, without customers needing to petition them.
have however located a repairer - 'Austronic LCFS' in Moorabbin, Vic.
If any aussies have used them i would appreciate your feedback.
MB should recognise their build quality issues and assist, without customers needing to petition them.
have however located a repairer - 'Austronic LCFS' in Moorabbin, Vic.
If any aussies have used them i would appreciate your feedback.
