When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi!
As I am living in Germany, cars here don't have these "Bumperettes" in the back as our number plates are wide and need the space.
I will try to get a short plate, so I have to shrink the space to convince the authorities that there's not enough space for the wide plate.
So if anyone has a pair to give away please write a note to me!
Thank you!
Rollo Looking for a pair of bumperettes AMG GTS
PFL205.064 with M276.823 (Oil pump solenoid defeated)
Originally Posted by Rollo_GTS
Hi!
As I am living in Germany, cars here don't have these "Bumperettes" in the back as our number plates are wide and need the space.
I will try to get a short plate, so I have to shrink the space to convince the authorities that there's not enough space for the wide plate.
So if anyone has a pair to give away please write a note to me!
Thank you!
Rollo https://cimg7.ibsrv.net/gimg/www.mbw...d667388493.png Looking for a pair of bumperettes AMG GTS
Originally Posted by gafitanu
Hello Rollo,
I intend to remove mine so I will be happy to send them to you. But they are blue.
If I recalled correctly, the C 63 S bumperettes have holes after removing and needs to be filled not sure if the AMG GT is like that as well, for that reason, OP you might need to drill holes if you want to put these on.
Are you sure you want these, we envy European market cars that don't have them, looks much better in my opinion.
If I recalled correctly, the C 63 S bumperettes have holes after removing and needs to be filled not sure if the AMG GT is like that as well, for that reason, OP you might need to drill holes if you want to put these on.
Are you sure you want these, we envy European market cars that don't have them, looks much better in my opinion.
your are totally right!
I will make a temporary plate housing with these Bumperettes without drilling new holes. Once I have the short numberplate I will remove the housing again.
Kind regards, Rollo
PFL205.064 with M276.823 (Oil pump solenoid defeated)
Originally Posted by Rollo_GTS
your are totally right!
I will make a temporary plate housing with these Bumperettes without drilling new holes. Once I have the short numberplate I will remove the housing again.
Kind regards, Rollo
I see sounds like a plan, hope everything goes out smoothly for you : )
I have a (fake) Stuttgart license plate and a (real) European frame from the Sindelfingen MB factory shop. They will cover the holes after removing the bumperettes and the MA plate will go on top of that.