Full Build GTS
#1
Senior Member
Thread Starter
Full Built GTS
Hi guys
My build start on my GTS Edition 1.
it will be full build engine with forged internals bigger turbos and downpipes. I chose GAD for that task.
The gearbox will be updated too.
The goal would be 950+ hp on cranckshaft.
I'll take you with me
My build start on my GTS Edition 1.
it will be full build engine with forged internals bigger turbos and downpipes. I chose GAD for that task.
The gearbox will be updated too.
The goal would be 950+ hp on cranckshaft.
I'll take you with me
Last edited by MrkiC63; 03-05-2018 at 05:32 AM.
The following 6 users liked this post by MrkiC63:
California John (01-25-2018),
dbasons55 (01-26-2018),
Fame Douglas (01-30-2018),
Jeff Whitten (01-25-2018),
PayKoHan (03-20-2019),
and 1 others liked this post.
#7
Member
Trending Topics
The following 3 users liked this post by MrkiC63:
The following 3 users liked this post by MrkiC63:
The following 2 users liked this post by MrkiC63:
California John (02-21-2018),
str8blst (02-21-2018)
#18
Senior Member
Thread Starter
#20
Member
#22
Member
#23
Senior Member
Thread Starter
#25
MBWorld Fanatic!
Join Date: Nov 2017
Posts: 1,600
Received 635 Likes
on
379 Posts
2021 AMG GLE 63s Coupe AMG GLC 63s Coupe
After looking at the Weistec water/meth kit you may want to rethink, Methanol is highly corrosive to aluminum and may eat away at the charge cooler cores over time.
The water/meth injectors should be placed in the discharge pipe not the hot side.
The water/meth injectors should be placed in the discharge pipe not the hot side.