GTC cooler screens
#1
Super Member
Thread Starter
GTC cooler screens
Morning all! Can anyone who’s taken delivery of a 19 GTC see if the front left and right coolers have the protective screens on them? If so can you PM me the last 8 digits of your vin so I can order them as well or alternately see if the part numbers match up with the part numbers for the screens in the other thread!
Thanks in advance!
Thanks in advance!
The following users liked this post:
SDAutoSalon (12-18-2018)
#5
MBWorld Fanatic!
You may have already read my posts in the other topic area. We are continuing to experience a delay in obtaining information from MB US on this issue.
I ordered the screens and my dealer is currently waiting on MB authorization for what was to be a free install and parts for GTR’S. I honestly don’t know about GTC’S.
The other unanswered question is do they install easily or does the front bumper have to be removed.
The following 2 users liked this post by JSwan724:
California John (12-04-2018),
emericr (12-04-2018)
The following users liked this post:
Ken Doo (12-18-2018)
#7
Junior Member
Im looking into these as we speak. Ill see if I am able to source an actual part number for this grill. Has anyone had any luck finding it or obtaining the part number?
Trending Topics
#9
MBWorld Fanatic!
[QUOTE=SDAutoSalon;7633140]Im looking into these as we speak. Ill see if I am able to source an actual part number for this grill. Has anyone had any luck findingof was he screebs with it or obtaining the part number?[/part numvwr.
QUOTE]
Look at my other post and you’ll see a picture of the screens and part number.
It take removal of the bumper and 4 hours labor to install them. I am not going out of pocket to do it.
Regards
QUOTE]
Look at my other post and you’ll see a picture of the screens and part number.
It take removal of the bumper and 4 hours labor to install them. I am not going out of pocket to do it.
Regards
The following users liked this post:
SDAutoSalon (12-18-2018)
#10
MBWorld Fanatic!
Join Date: May 2008
Location: Overland Park, KS
Posts: 2,469
Received 966 Likes
on
581 Posts
‘24 BMW iX M60
[QUOTE=JSwan724;7633264]
Jerry,
Did you get anywhere asking MB via your dealership regarding paying for the install on our '18's?
Bish
Im looking into these as we speak. Ill see if I am able to source an actual part number for this grill. Has anyone had any luck findingof was he screebs with it or obtaining the part number?[/part numvwr.
QUOTE]
Look at my other post and you’ll see a picture of the screens and part number.
It take removal of the bumper and 4 hours labor to install them. I am not going out of pocket to do it.
Regards
QUOTE]
Look at my other post and you’ll see a picture of the screens and part number.
It take removal of the bumper and 4 hours labor to install them. I am not going out of pocket to do it.
Regards
Did you get anywhere asking MB via your dealership regarding paying for the install on our '18's?
Bish
#11
MBWorld Fanatic!
[QUOTE=thebishman;7633334]
Bish:
I was at my dealer today about the current status of this and the Track Pack. They have tried to obtain information from several sources and are unsuccessful at this point.
They advised that the front bumper needs to come off and the labor to install is 4 hours. The parts are about $20 each side. Some owners have gone out of pocket for the install but I won’t.
They recommend that I (we) contact the MB CAC (800) 222-0100 and request their help for current information and or a solution.
UPDATE 12/19 3:13pm Don’t bother calling the CAC for either issue. They just give you the same run around and NO useful information as usual.
Best Regards and Merry Christmas
Jerry
Bish:
I was at my dealer today about the current status of this and the Track Pack. They have tried to obtain information from several sources and are unsuccessful at this point.
They advised that the front bumper needs to come off and the labor to install is 4 hours. The parts are about $20 each side. Some owners have gone out of pocket for the install but I won’t.
They recommend that I (we) contact the MB CAC (800) 222-0100 and request their help for current information and or a solution.
UPDATE 12/19 3:13pm Don’t bother calling the CAC for either issue. They just give you the same run around and NO useful information as usual.
Best Regards and Merry Christmas
Jerry
Last edited by JSwan724; 12-19-2018 at 03:15 PM.
The following users liked this post:
SDAutoSalon (12-18-2018)
#12
Junior Member
got them ordered. thank you for the quick response.
Also what did you mean by you're not going out of pocket to do it?
Once I got them in I was thinking of doing a quick write up unless someone already has written one up.
Also what did you mean by you're not going out of pocket to do it?
Once I got them in I was thinking of doing a quick write up unless someone already has written one up.
#13
Junior Member
also, was the part number the same for both sides? Im assuming its the same piece you just flip it over depending on if its the right or left side correct?
#14
Super Member
Thread Starter
Parts are easy...
Install is about $300 up here if you know a competent body shop. I’m gonna pay out of pocket that way I know it’s done and they are in. Not having any protection is just nuts.
#15
Junior Member
California price tag for these is $49.99 each. same part number for both sides. Painting these black chrome before installing. Ill post pictures later.
#16
MBWorld Fanatic!
FOR THE GTR - Installation requires removing the bumper because the underside of the front end is enclosed and there is no other way in.
BTW: Why are you painting them black? They are already black from MB.
Regards
Last edited by JSwan724; 12-19-2018 at 03:17 PM.
#20
Junior Member
will do, I actually took a bunch of pictures as I was installing them & wasn't sure if I should post it all on here or just start a new thread.. Im also in the process of posting on Instagram and possibly a quick video on YouTube as well. Ill send updates tomorrow. As for your question on how these screens attach, there are four clips 2 on top and two on bottom that snap on to the oil cooler itself. Hopefully this picture gives you a better idea.
clips snap on to the top & bottom of the oil coolers
clips snap on to the top & bottom of the oil coolers
#21
Junior Member
for the cooler covers they were painted a black chrome color to better match the existing black chrome on the exterior of the vehicle. There have been other mods on the interior and exterior of the vehicle that have been blacked out with a black chrome finish paint. It is a very subtle difference from the black plastic finish it comes with, I will say that it looks better in person.
#22
MBWorld Fanatic!
Join Date: May 2008
Location: Overland Park, KS
Posts: 2,469
Received 966 Likes
on
581 Posts
‘24 BMW iX M60
will do, I actually took a bunch of pictures as I was installing them & wasn't sure if I should post it all on here or just start a new thread.. Im also in the process of posting on Instagram and possibly a quick video on YouTube as well. Ill send updates tomorrow. As for your question on how these screens attach, there are four clips 2 on top and two on bottom that snap on to the oil cooler itself. Hopefully this picture gives you a better idea.
clips snap on to the top & bottom of the oil coolers
clips snap on to the top & bottom of the oil coolers
Bish
#23
Junior Member
Actually no, removing the front end bumper cover and reinstalling is much less time than that. A good portion of the install is opening the enclosures surrounding the oil coolers themselves in order to free up enough space to get the screens to mount in and clip on to the coolers.
#24
MBWorld Fanatic!
Join Date: Oct 2015
Posts: 1,458
Received 868 Likes
on
451 Posts
2023 Urus Performante - 2021 Ferrari Roma - 2017 Ferrari 488 GTB - 2022 GLE 63 S Coupe
I need some clarity. So if I go to the dealer with my 2018 GTR. I can ask for and get this done at no charge? Anyone had any luck or success with this? Or do you just purchase them and you're on your own?
#25
MBWorld Fanatic!
Join Date: May 2008
Location: Overland Park, KS
Posts: 2,469
Received 966 Likes
on
581 Posts
‘24 BMW iX M60
Actually no, removing the front end bumper cover and reinstalling is much less time than that. A good portion of the install is opening the enclosures surrounding the oil coolers themselves in order to free up enough space to get the screens to mount in and clip on to the coolers.
TIA,
Bish