cliffybabe

Hi Guys

I have installed the tv tuner into my clk, it works fine in the sense av1 plays great and the tv picture when tuning is great.

However once stored and i try and go into the tv channle you get sound and no pic, i get a tv with a cross through it indercating no signal however it works fine when tuning in and through av1 can anyone advise.

Thanks

Neil

scorchie

please don't crosspost especially more than once.

https://mbworld.org/forums/c-class-w203/100352-help-need-tv-tuner-programing.html

-s-

cliffybabe

sorry s, its just that im despriate to get this resolved.

Neil

miroj

Clear all the stored memory of channel locations and store them again.

cliffybabe

I'lll give it a try first thing in the morning

Thanks

Micro

miroj

No worries Clefty

cliffybabe

Ok I have tried taking out other coding to no joy, it just puts them back in.

I have tried going uo the road to get a better signal no joy.

I now can recive teletex

But it still wont show a picture on the screen once i have tuned it in.

Thanks

Neil

cliffybabe

Please can someone help, I have spent the hole day tring different tuning etc, it will not display anything except the av channels and when in tuning mode for the tv, when i save and go back to normal screen the picture is not there just a black screen with the tv programs sound only.

I dont think its cabling issue as i wouldnt have anything at all, I went into comand diagnostics via fm, mute 1&2 and it doesnt show the tv tuner as being ticked is this the issue?

ANY HELP would be great as im really stuck and its starting to depress me.

Thanks

Neil

cliffybabe

Could this be a wiring issue?

Thanks

Neil

miroj

Sure - power to the antenna and TV tuner power output fuse is the suspect (located on TV tuner)