DIY: New Chrome key upgrade/retrofit.
#51
#52
Junior Member
Sorry, I should have ask the question in another way. I was just wondering if you have any KG circuit boards that aren't working so I can replace the SMD inductor on mine. My Key still unlocks doors and starts the car, just the keyless go doesn't work to start the car like it used too.
The following users liked this post:
craigc (03-27-2019)
#54
So I bought this key from ebay https://www.ebay.com/itm/Replacement...53.m2749.l2649
With the main idea of getting the induction coil and soldering it onto my key without one. Unfortunately, it didn't have the correct induction coil.
I did see it did have a 30pin chip the same dimensions as the nec chip with the numbers F9234. Although I don't see the other larger chips (AMS and what not) on the board. Think it would be worth a try to switch chips?
With the main idea of getting the induction coil and soldering it onto my key without one. Unfortunately, it didn't have the correct induction coil.
I did see it did have a 30pin chip the same dimensions as the nec chip with the numbers F9234. Although I don't see the other larger chips (AMS and what not) on the board. Think it would be worth a try to switch chips?
#55
Junior Member
If you're looking for parts for your key fob you need to find the FCC / IC ID on your fob on the battery insert and buy the same. This way you get the same as your original. Some fobs / cars have Keyless go like mine and some don't. they are different internally.
#56
Senior Member
Does anyone know if the complete circuit boards for these two fob types are interchangeable (this is for a CLK550)?
The reason I ask is that the Mercedes logo fell off from one of my fobs (Version 1), but Version 1 is difficult to find used; Version 2 is a lot easier to find. I just want to take out the circuit board from my original fob (Version 1) and pop it into a new one (Version 2). I don't need to swap the ROM chips or anything.
The reason I ask is that the Mercedes logo fell off from one of my fobs (Version 1), but Version 1 is difficult to find used; Version 2 is a lot easier to find. I just want to take out the circuit board from my original fob (Version 1) and pop it into a new one (Version 2). I don't need to swap the ROM chips or anything.
Last edited by nkx1; 04-09-2019 at 09:58 PM.
#57
Senior Member
Join Date: Nov 2010
Location: Norway
Posts: 365
Likes: 0
Received 25 Likes
on
23 Posts
350 SL, R230 - 300 SL, R129 - 1964 Corvette Sting Ray Sport Coupe - Porsche 911 Twin Turbo (sold)
Thinking of the fact that many that have replaced to the facelift "chrome" smart key saying that the facelift chrome key feels more solid with the metal chrome.
The old all plastic black smart key and the new facelift chrome key are identical in the fact that they both are made of plastic i guess. The chrome part of the facelift chrome smart key are chromed plastic i guess but i will not say it for sure
The old all plastic black smart key and the new facelift chrome key are identical in the fact that they both are made of plastic i guess. The chrome part of the facelift chrome smart key are chromed plastic i guess but i will not say it for sure
#58
Alright, maybe you guys can help me out here.
So a while back my car randomly wouldn't start. Saw that the Transponder coil was damaged. I eventually got the Rounded Panic version chrome key off of ebay, and had a professional microsolder the chip in.
The key unlocked my doors just fine, but doesn't work on the ignition (nothing happens when I place the key in.)
I tried pressing the buttons to see if I can see an IR signal from y Phone's camera and didn't see any...but I assume there is one if I can unlock/lock the doors.
Maybe a fuse is bad? which fuses would I check? Any help would be great.
EDIT. IR does work with face cam and not back camera
So a while back my car randomly wouldn't start. Saw that the Transponder coil was damaged. I eventually got the Rounded Panic version chrome key off of ebay, and had a professional microsolder the chip in.
The key unlocked my doors just fine, but doesn't work on the ignition (nothing happens when I place the key in.)
I tried pressing the buttons to see if I can see an IR signal from y Phone's camera and didn't see any...but I assume there is one if I can unlock/lock the doors.
Maybe a fuse is bad? which fuses would I check? Any help would be great.
EDIT. IR does work with face cam and not back camera
Last edited by Bc Valdez; 05-15-2019 at 07:04 PM. Reason: More info
#59
Junior Member
The unlocking of the doors is RF ( radio frequency) and so is keyless go. When my only key quit working I was super freaked out because I live a 100 miles from the closest MB dealer. Search for my post about reflowing the solder of the remote, it saved my @ss. My remote now works. Give it a whirl, what do you have to loose.
Alright, maybe you guys can help me out here.
So a while back my car randomly wouldn't start. Saw that the Transponder coil was damaged. I eventually got the Rounded Panic version chrome key off of ebay, and had a professional microsolder the chip in.
The key unlocked my doors just fine, but doesn't work on the ignition (nothing happens when I place the key in.)
I tried pressing the buttons to see if I can see an IR signal from y Phone's camera and didn't see any...but I assume there is one if I can unlock/lock the doors.
Maybe a fuse is bad? which fuses would I check? Any help would be great.
EDIT. IR does work with face cam and not back camera
So a while back my car randomly wouldn't start. Saw that the Transponder coil was damaged. I eventually got the Rounded Panic version chrome key off of ebay, and had a professional microsolder the chip in.
The key unlocked my doors just fine, but doesn't work on the ignition (nothing happens when I place the key in.)
I tried pressing the buttons to see if I can see an IR signal from y Phone's camera and didn't see any...but I assume there is one if I can unlock/lock the doors.
Maybe a fuse is bad? which fuses would I check? Any help would be great.
EDIT. IR does work with face cam and not back camera
#63
Newbie
Join Date: Oct 2014
Location: Seattle, Wa
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Unicorn - 2008 FULLY MANUAL C300 Previous 2006 C240. 2006 CLK 320 2001 C280 1984 E300 *First car :)
Does anyone know if the complete circuit boards for these two fob types are interchangeable (this is for a CLK550)?
The reason I ask is that the Mercedes logo fell off from one of my fobs (Version 1), but Version 1 is difficult to find used; Version 2 is a lot easier to find. I just want to take out the circuit board from my original fob (Version 1) and pop it into a new one (Version 2). I don't need to swap the ROM chips or anything.
The reason I ask is that the Mercedes logo fell off from one of my fobs (Version 1), but Version 1 is difficult to find used; Version 2 is a lot easier to find. I just want to take out the circuit board from my original fob (Version 1) and pop it into a new one (Version 2). I don't need to swap the ROM chips or anything.