Wire Routing Vibration Damping
Thread Starter
Super Member
Joined: Aug 2009
Posts: 998
Likes: 70
From: Oakland
W210 DRFT BNZ
Wire Routing Vibration Damping
Hey team,
I upgraded the rear low freq driver in my sailpanel on my E55 and in the process moved wire around.
The way they are secured from the factory is felt tape to the foam layers under the interior trim which works really well.
My question is: what do you professional guys use to make sure the wires are resting flush against surfaces and aren't being rattled around?
Can I buy that felt tape? Perhaps there's soft foam rings or sleeves I can buy to just throw on parts I suspect may be creating noise.
Any suggestions or tips welcome, thanks folks!
I upgraded the rear low freq driver in my sailpanel on my E55 and in the process moved wire around.
The way they are secured from the factory is felt tape to the foam layers under the interior trim which works really well.
My question is: what do you professional guys use to make sure the wires are resting flush against surfaces and aren't being rattled around?
Can I buy that felt tape? Perhaps there's soft foam rings or sleeves I can buy to just throw on parts I suspect may be creating noise.
Any suggestions or tips welcome, thanks folks!
