W211 Becker rear seat screen to Pioneer radio
#1
Junior Member
Thread Starter
W211 Becker rear seat screen to Pioneer radio
Hi guys,
i have a w211 (2004) van with comand APS and a Becker rear seat entertainment LCD screen (see photo). Recently i installed a Pioneer AVIC-Z910DAB and want to get image to the becker screen. I managed to get power to the screen but it instantly powers off. My question is:
Can i keep the Becker rear screen and have it working with the Pioneer radio? Or the screen only works with the comand head unit? How do i power it, what wires do i have to connect?
Here's the Pin-out for the D25 (Rear Screen) connector:
1 Ubat+ (circuit 30)
3 AUDIO R
4 AUDIO L
6 CAN Low
7 CAN High
8 CVBS (FBAS)
14 Circuit 31
15 AUDIO screening
16 AUDIO ground
20 AUDIO GND CYBS (FBAS) ground
** All other pins are not assigned
i have a w211 (2004) van with comand APS and a Becker rear seat entertainment LCD screen (see photo). Recently i installed a Pioneer AVIC-Z910DAB and want to get image to the becker screen. I managed to get power to the screen but it instantly powers off. My question is:
Can i keep the Becker rear screen and have it working with the Pioneer radio? Or the screen only works with the comand head unit? How do i power it, what wires do i have to connect?
Here's the Pin-out for the D25 (Rear Screen) connector:
1 Ubat+ (circuit 30)
3 AUDIO R
4 AUDIO L
6 CAN Low
7 CAN High
8 CVBS (FBAS)
14 Circuit 31
15 AUDIO screening
16 AUDIO ground
20 AUDIO GND CYBS (FBAS) ground
** All other pins are not assigned
Last edited by pedroenf; 12-11-2018 at 10:31 PM.